28349 11:25:34 (0) ** WMIDiag v2.0 started on 10  2007 . at 11:11.
28350 11:25:34 (0) ** 
28351 11:25:34 (0) ** Copyright (c) Microsoft Corporation. All rights reserved - January 2007.
28352 11:25:34 (0) ** 
28353 11:25:34 (0) ** This script is not supported under any Microsoft standard support program or service.
28354 11:25:34 (0) ** The script is provided AS IS without warranty of any kind. Microsoft further disclaims all
28355 11:25:34 (0) ** implied warranties including, without limitation, any implied warranties of merchantability
28356 11:25:34 (0) ** or of fitness for a particular purpose. The entire risk arising out of the use or performance
28357 11:25:34 (0) ** of the scripts and documentation remains with you. In no event shall Microsoft, its authors,
28358 11:25:34 (0) ** or anyone else involved in the creation, production, or delivery of the script be liable for
28359 11:25:34 (0) ** any damages whatsoever (including, without limitation, damages for loss of business profits,
28360 11:25:34 (0) ** business interruption, loss of business information, or other pecuniary loss) arising out of
28361 11:25:34 (0) ** the use of or inability to use the script or documentation, even if Microsoft has been advised
28362 11:25:34 (0) ** of the possibility of such damages.
28363 11:25:34 (0) ** 
28364 11:25:34 (0) ** 
28365 11:25:34 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
28366 11:25:34 (0) ** ----------------------------------------------------- WMI REPORT: BEGIN ----------------------------------------------------------
28367 11:25:34 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
28368 11:25:34 (0) ** 
28369 11:25:34 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
28370 11:25:34 (0) ** Windows Vista - No service pack - 32-bit (6000) - User 'SIMSIM-M\SIMSIM' on computer 'SIMSIM-M'.
28371 11:25:34 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
28372 11:25:34 (0) ** Environment: ........................................................................................................ OK..
28373 11:25:34 (0) ** System drive: ....................................................................................................... C: (Disk #0 Partition #0).
28374 11:25:34 (0) ** Drive type: ......................................................................................................... IDE (HDS722516VLSA80 ATA Device).
28375 11:25:34 (0) ** There are no missing WMI system files: .............................................................................. OK.
28376 11:25:34 (0) ** There are no missing WMI repository files: .......................................................................... OK.
28377 11:25:34 (0) ** WMI repository state: ............................................................................................... CONSISTENT.
28378 11:25:34 (0) ** BEFORE running WMIDiag:
28379 11:25:34 (0) ** The WMI repository has a size of: ................................................................................... 27 MB.
28380 11:25:34 (0) ** - Disk free space on 'C:': .......................................................................................... 30401 MB.
28381 11:25:34 (0) **   - INDEX.BTR,                     3383296 bytes,      10.06.2007 11:08:36
28382 11:25:34 (0) **   - MAPPING1.MAP,                  81780 bytes,        10.06.2007 11:08:36
28383 11:25:34 (0) **   - MAPPING2.MAP,                  81780 bytes,        09.06.2007 18:17:12
28384 11:25:34 (0) **   - OBJECTS.DATA,                  25182208 bytes,     10.06.2007 11:08:36
28385 11:25:34 (0) ** AFTER running WMIDiag:
28386 11:25:34 (0) ** The WMI repository has a size of: ................................................................................... 27 MB.
28387 11:25:34 (0) ** - Disk free space on 'C:': .......................................................................................... 30393 MB.
28388 11:25:34 (0) **   - INDEX.BTR,                     3383296 bytes,      10.06.2007 11:08:36
28389 11:25:34 (0) **   - MAPPING1.MAP,                  81780 bytes,        10.06.2007 11:08:36
28390 11:25:34 (0) **   - MAPPING2.MAP,                  81780 bytes,        09.06.2007 18:17:12
28391 11:25:34 (0) **   - OBJECTS.DATA,                  25182208 bytes,     10.06.2007 11:08:36
28392 11:25:34 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
28393 11:25:34 (0) ** INFO: Windows Firewall status: ...................................................................................... ENABLED.
28394 11:25:34 (0) ** Windows Firewall Profile: ........................................................................................... PUBLIC.
28395 11:25:34 (0) ** Inbound connections that do not match a rule BLOCKED: ............................................................... ENABLED.
28396 11:25:34 (0) ** => This will prevent any WMI remote connectivity to this computer except
28397 11:25:34 (0) **    if the following three inbound rules are ENABLED and non-BLOCKING:
28398 11:25:34 (0) **    - 'Windows Management Instrumentation (DCOM-In)'
28399 11:25:34 (0) **    - 'Windows Management Instrumentation (WMI-In)'
28400 11:25:34 (0) **    - 'Windows Management Instrumentation (ASync-In)'
28401 11:25:34 (0) **    Verify the reported status for each of these three inbound rules below.
28402 11:25:34 (0) ** 
28403 11:25:34 (0) ** Windows Firewall 'Windows Management Instrumentation (WMI)' group rule: ............................................. DISABLED.
28404 11:25:34 (0) ** => This will prevent any WMI remote connectivity to/from this machine.
28405 11:25:34 (0) **    - You can adjust the configuration by executing the following command:
28406 11:25:34 (0) **    i.e. 'NETSH.EXE ADVFIREWALL FIREWALL SET RULE GROUP="Windows Management Instrumentation (WMI)" NEW ENABLE=YES'
28407 11:25:34 (0) ** Note: With this command all inbound and outbound WMI rules are activated at once!
28408 11:25:34 (0) **       You can also enable each individual rule instead of activating the group rule.
28409 11:25:34 (0) ** 
28410 11:25:34 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
28411 11:25:34 (0) ** DCOM Status: ........................................................................................................ OK.
28412 11:25:34 (0) ** WMI registry setup: ................................................................................................. OK.
28413 11:25:34 (0) ** INFO: WMI service has dependents: ................................................................................... 2 SERVICE(S)!
28414 11:25:34 (0) ** - Security Center (WSCSVC, StartMode='Automatic')
28415 11:25:34 (0) ** - Internet Connection Sharing (ICS) (SHAREDACCESS, StartMode='Manual')
28416 11:25:34 (0) ** => If the WMI service is stopped, the listed service(s) will have to be stopped as well.
28417 11:25:34 (0) **    Note: If the service is marked with (*), it means that the service/application uses WMI but
28418 11:25:34 (0) **          there is no hard dependency on WMI. However, if the WMI service is stopped,
28419 11:25:34 (0) **          this can prevent the service/application to work as expected.
28420 11:25:34 (0) ** 
28421 11:25:34 (0) ** RPCSS service: ...................................................................................................... OK (Already started).
28422 11:25:34 (0) ** WINMGMT service: .................................................................................................... OK (Already started).
28423 11:25:34 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
28424 11:25:34 (0) ** WMI service DCOM setup: ............................................................................................. OK.
28425 11:25:34 (0) ** WMI components DCOM registrations: .................................................................................. OK.
28426 11:25:34 (0) ** WMI ProgID registrations: ........................................................................................... OK.
28427 11:25:34 (0) ** WMI provider DCOM registrations: .................................................................................... OK.
28428 11:25:34 (0) ** WMI provider CIM registrations: ..................................................................................... OK.
28429 11:25:34 (0) ** WMI provider CLSIDs: ................................................................................................ OK.
28430 11:25:34 (0) ** WMI providers EXE/DLL availability: ................................................................................. OK.
28431 11:25:34 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
28432 11:25:34 (0) ** INFO: User Account Control (UAC): ................................................................................... DISABLED.
28433 11:25:34 (0) ** INFO: Local Account Filtering: ...................................................................................... ENABLED.
28434 11:25:34 (0) ** => WMI tasks remotely accessing WMI information on this computer and requiring Administrative
28435 11:25:34 (0) **    privileges MUST use a DOMAIN account part of the Local Administrators group of this computer
28436 11:25:34 (0) **    to ensure that administrative privileges are granted. If a Local User account is used for remote
28437 11:25:34 (0) **    accesses, it will be reduced to a plain user (filtered token), even if it is part of the Local Administrators group.
28438 11:25:34 (0) ** 
28439 11:25:34 (0) ** DCOM security for 'My Computer' (Access Permissions/Edit Limits): ................................................... MODIFIED.
28440 11:25:34 (1) !! ERROR: Default trustee 'NT AUTHORITY\ANONYMOUS LOGON' has been REMOVED!
28441 11:25:34 (0) **        - REMOVED ACE:
28442 11:25:34 (0) **          ACEType:  &h0
28443 11:25:34 (0) **                    ACCESS_ALLOWED_ACE_TYPE
28444 11:25:34 (0) **          ACEFlags: &h0
28445 11:25:34 (0) **          ACEMask:  &h3
28446 11:25:34 (0) **                    DCOM_RIGHT_EXECUTE
28447 11:25:34 (0) **                    DCOM_RIGHT_ACCESS_LOCAL
28448 11:25:34 (0) ** 
28449 11:25:34 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
28450 11:25:34 (0) **    Removing default security will cause some operations to fail!
28451 11:25:34 (0) **    It is possible to fix this issue by editing the security descriptor and adding the ACE.
28452 11:25:34 (0) **    For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
28453 11:25:34 (0) ** 
28454 11:25:34 (0) ** DCOM security for 'My Computer' (Access Permissions/Edit Limits): ................................................... MODIFIED.
28455 11:25:34 (1) !! ERROR: Default trustee 'BUILTIN\DISTRIBUTED COM USERS' has been REMOVED!
28456 11:25:34 (0) **        - REMOVED ACE:
28457 11:25:34 (0) **          ACEType:  &h0
28458 11:25:34 (0) **                    ACCESS_ALLOWED_ACE_TYPE
28459 11:25:34 (0) **          ACEFlags: &h0
28460 11:25:34 (0) **          ACEMask:  &h7
28461 11:25:34 (0) **                    DCOM_RIGHT_EXECUTE
28462 11:25:34 (0) **                    DCOM_RIGHT_ACCESS_LOCAL
28463 11:25:34 (0) **                    DCOM_RIGHT_ACCESS_REMOTE
28464 11:25:34 (0) ** 
28465 11:25:34 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
28466 11:25:34 (0) **    Removing default security will cause some operations to fail!
28467 11:25:34 (0) **    It is possible to fix this issue by editing the security descriptor and adding the ACE.
28468 11:25:34 (0) **    For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
28469 11:25:34 (0) ** 
28470 11:25:34 (0) ** DCOM security for 'My Computer' (Access Permissions/Edit Limits): ................................................... MODIFIED.
28471 11:25:34 (1) !! ERROR: Default trustee 'BUILTIN\PERFORMANCE LOG USERS' has been REMOVED!
28472 11:25:34 (0) **        - REMOVED ACE:
28473 11:25:34 (0) **          ACEType:  &h0
28474 11:25:34 (0) **                    ACCESS_ALLOWED_ACE_TYPE
28475 11:25:34 (0) **          ACEFlags: &h0
28476 11:25:34 (0) **          ACEMask:  &h7
28477 11:25:34 (0) **                    DCOM_RIGHT_EXECUTE
28478 11:25:34 (0) **                    DCOM_RIGHT_ACCESS_LOCAL
28479 11:25:34 (0) **                    DCOM_RIGHT_ACCESS_REMOTE
28480 11:25:34 (0) ** 
28481 11:25:34 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
28482 11:25:34 (0) **    Removing default security will cause some operations to fail!
28483 11:25:34 (0) **    It is possible to fix this issue by editing the security descriptor and adding the ACE.
28484 11:25:34 (0) **    For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
28485 11:25:34 (0) ** 
28486 11:25:34 (0) ** DCOM security for 'My Computer' (Access Permissions/Edit Limits): ................................................... MODIFIED.
28487 11:25:34 (1) !! ERROR: Default trustee 'EVERYONE' has been REMOVED!
28488 11:25:34 (0) **        - REMOVED ACE:
28489 11:25:34 (0) **          ACEType:  &h0
28490 11:25:34 (0) **                    ACCESS_ALLOWED_ACE_TYPE
28491 11:25:34 (0) **          ACEFlags: &h0
28492 11:25:34 (0) **          ACEMask:  &h7
28493 11:25:34 (0) **                    DCOM_RIGHT_EXECUTE
28494 11:25:34 (0) **                    DCOM_RIGHT_ACCESS_LOCAL
28495 11:25:34 (0) **                    DCOM_RIGHT_ACCESS_REMOTE
28496 11:25:34 (0) ** 
28497 11:25:34 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
28498 11:25:34 (0) **    Removing default security will cause some operations to fail!
28499 11:25:34 (0) **    It is possible to fix this issue by editing the security descriptor and adding the ACE.
28500 11:25:34 (0) **    For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
28501 11:25:34 (0) ** 
28502 11:25:34 (0) ** DCOM security for 'My Computer' (Launch & Activation Permissions/Edit Default): ..................................... MODIFIED.
28503 11:25:34 (1) !! ERROR: Default trustee 'BUILTIN\ADMINISTRATORS' has been REMOVED!
28504 11:25:34 (0) **        - REMOVED ACE:
28505 11:25:34 (0) **          ACEType:  &h0
28506 11:25:34 (0) **                    ACCESS_ALLOWED_ACE_TYPE
28507 11:25:34 (0) **          ACEFlags: &h0
28508 11:25:34 (0) **          ACEMask:  &h1F
28509 11:25:34 (0) **                    DCOM_RIGHT_EXECUTE
28510 11:25:34 (0) **                    DCOM_RIGHT_LAUNCH_LOCAL
28511 11:25:34 (0) **                    DCOM_RIGHT_LAUNCH_REMOTE
28512 11:25:34 (0) **                    DCOM_RIGHT_ACTIVATE_LOCAL
28513 11:25:34 (0) **                    DCOM_RIGHT_ACTIVATE_REMOTE
28514 11:25:34 (0) ** 
28515 11:25:34 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
28516 11:25:34 (0) **    Removing default security will cause some operations to fail!
28517 11:25:34 (0) **    It is possible to fix this issue by editing the security descriptor and adding the ACE.
28518 11:25:34 (0) **    For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
28519 11:25:34 (0) ** 
28520 11:25:34 (0) ** DCOM security for 'My Computer' (Launch & Activation Permissions/Edit Default): ..................................... MODIFIED.
28521 11:25:34 (1) !! ERROR: Default trustee 'NT AUTHORITY\INTERACTIVE' has been REMOVED!
28522 11:25:34 (0) **        - REMOVED ACE:
28523 11:25:34 (0) **          ACEType:  &h0
28524 11:25:34 (0) **                    ACCESS_ALLOWED_ACE_TYPE
28525 11:25:34 (0) **          ACEFlags: &h0
28526 11:25:34 (0) **          ACEMask:  &h1F
28527 11:25:34 (0) **                    DCOM_RIGHT_EXECUTE
28528 11:25:34 (0) **                    DCOM_RIGHT_LAUNCH_LOCAL
28529 11:25:34 (0) **                    DCOM_RIGHT_LAUNCH_REMOTE
28530 11:25:34 (0) **                    DCOM_RIGHT_ACTIVATE_LOCAL
28531 11:25:34 (0) **                    DCOM_RIGHT_ACTIVATE_REMOTE
28532 11:25:34 (0) ** 
28533 11:25:34 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
28534 11:25:34 (0) **    Removing default security will cause some operations to fail!
28535 11:25:34 (0) **    It is possible to fix this issue by editing the security descriptor and adding the ACE.
28536 11:25:34 (0) **    For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
28537 11:25:34 (0) ** 
28538 11:25:34 (0) ** DCOM security for 'My Computer' (Launch & Activation Permissions/Edit Limits): ...................................... MODIFIED.
28539 11:25:34 (1) !! ERROR: Default trustee 'BUILTIN\ADMINISTRATORS' has been REMOVED!
28540 11:25:34 (0) **        - REMOVED ACE:
28541 11:25:34 (0) **          ACEType:  &h0
28542 11:25:34 (0) **                    ACCESS_ALLOWED_ACE_TYPE
28543 11:25:34 (0) **          ACEFlags: &h0
28544 11:25:34 (0) **          ACEMask:  &h1F
28545 11:25:34 (0) **                    DCOM_RIGHT_EXECUTE
28546 11:25:34 (0) **                    DCOM_RIGHT_LAUNCH_LOCAL
28547 11:25:34 (0) **                    DCOM_RIGHT_LAUNCH_REMOTE
28548 11:25:34 (0) **                    DCOM_RIGHT_ACTIVATE_LOCAL
28549 11:25:34 (0) **                    DCOM_RIGHT_ACTIVATE_REMOTE
28550 11:25:34 (0) ** 
28551 11:25:34 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
28552 11:25:34 (0) **    Removing default security will cause some operations to fail!
28553 11:25:34 (0) **    It is possible to fix this issue by editing the security descriptor and adding the ACE.
28554 11:25:34 (0) **    For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
28555 11:25:34 (0) ** 
28556 11:25:34 (0) ** DCOM security for 'My Computer' (Launch & Activation Permissions/Edit Limits): ...................................... MODIFIED.
28557 11:25:34 (1) !! ERROR: Default trustee 'BUILTIN\DISTRIBUTED COM USERS' has been REMOVED!
28558 11:25:34 (0) **        - REMOVED ACE:
28559 11:25:34 (0) **          ACEType:  &h0
28560 11:25:34 (0) **                    ACCESS_ALLOWED_ACE_TYPE
28561 11:25:34 (0) **          ACEFlags: &h0
28562 11:25:34 (0) **          ACEMask:  &h1F
28563 11:25:34 (0) **                    DCOM_RIGHT_EXECUTE
28564 11:25:34 (0) **                    DCOM_RIGHT_LAUNCH_LOCAL
28565 11:25:34 (0) **                    DCOM_RIGHT_LAUNCH_REMOTE
28566 11:25:34 (0) **                    DCOM_RIGHT_ACTIVATE_LOCAL
28567 11:25:34 (0) **                    DCOM_RIGHT_ACTIVATE_REMOTE
28568 11:25:34 (0) ** 
28569 11:25:34 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
28570 11:25:34 (0) **    Removing default security will cause some operations to fail!
28571 11:25:34 (0) **    It is possible to fix this issue by editing the security descriptor and adding the ACE.
28572 11:25:34 (0) **    For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
28573 11:25:34 (0) ** 
28574 11:25:34 (0) ** DCOM security for 'My Computer' (Launch & Activation Permissions/Edit Limits): ...................................... MODIFIED.
28575 11:25:34 (1) !! ERROR: Default trustee 'BUILTIN\PERFORMANCE LOG USERS' has been REMOVED!
28576 11:25:34 (0) **        - REMOVED ACE:
28577 11:25:34 (0) **          ACEType:  &h0
28578 11:25:34 (0) **                    ACCESS_ALLOWED_ACE_TYPE
28579 11:25:34 (0) **          ACEFlags: &h0
28580 11:25:34 (0) **          ACEMask:  &h1F
28581 11:25:34 (0) **                    DCOM_RIGHT_EXECUTE
28582 11:25:34 (0) **                    DCOM_RIGHT_LAUNCH_LOCAL
28583 11:25:34 (0) **                    DCOM_RIGHT_LAUNCH_REMOTE
28584 11:25:34 (0) **                    DCOM_RIGHT_ACTIVATE_LOCAL
28585 11:25:34 (0) **                    DCOM_RIGHT_ACTIVATE_REMOTE
28586 11:25:34 (0) ** 
28587 11:25:34 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
28588 11:25:34 (0) **    Removing default security will cause some operations to fail!
28589 11:25:34 (0) **    It is possible to fix this issue by editing the security descriptor and adding the ACE.
28590 11:25:34 (0) **    For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
28591 11:25:34 (0) ** 
28592 11:25:34 (0) ** DCOM security for 'My Computer' (Launch & Activation Permissions/Edit Limits): ...................................... MODIFIED.
28593 11:25:34 (1) !! ERROR: Default trustee 'EVERYONE' has been REMOVED!
28594 11:25:34 (0) **        - REMOVED ACE:
28595 11:25:34 (0) **          ACEType:  &h0
28596 11:25:34 (0) **                    ACCESS_ALLOWED_ACE_TYPE
28597 11:25:34 (0) **          ACEFlags: &h0
28598 11:25:34 (0) **          ACEMask:  &hB
28599 11:25:34 (0) **                    DCOM_RIGHT_EXECUTE
28600 11:25:34 (0) **                    DCOM_RIGHT_LAUNCH_LOCAL
28601 11:25:34 (0) **                    DCOM_RIGHT_ACTIVATE_LOCAL
28602 11:25:34 (0) ** 
28603 11:25:34 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
28604 11:25:34 (0) **    Removing default security will cause some operations to fail!
28605 11:25:34 (0) **    It is possible to fix this issue by editing the security descriptor and adding the ACE.
28606 11:25:34 (0) **    For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
28607 11:25:34 (0) ** 
28608 11:25:34 (0) ** DCOM security for 'Windows Management Instrumentation' (Launch & Activation Permissions): ........................... MODIFIED.
28609 11:25:34 (1) !! ERROR: Default trustee 'EVERYONE' has been REMOVED!
28610 11:25:34 (0) **        - REMOVED ACE:
28611 11:25:34 (0) **          ACEType:  &h0
28612 11:25:34 (0) **                    ACCESS_ALLOWED_ACE_TYPE
28613 11:25:34 (0) **          ACEFlags: &h0
28614 11:25:34 (0) **          ACEMask:  &h1F
28615 11:25:34 (0) **                    DCOM_RIGHT_EXECUTE
28616 11:25:34 (0) **                    DCOM_RIGHT_LAUNCH_LOCAL
28617 11:25:34 (0) **                    DCOM_RIGHT_LAUNCH_REMOTE
28618 11:25:34 (0) **                    DCOM_RIGHT_ACTIVATE_LOCAL
28619 11:25:34 (0) **                    DCOM_RIGHT_ACTIVATE_REMOTE
28620 11:25:34 (0) ** 
28621 11:25:34 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
28622 11:25:34 (0) **    Removing default security will cause some operations to fail!
28623 11:25:34 (0) **    It is possible to fix this issue by editing the security descriptor and adding the ACE.
28624 11:25:34 (0) **    For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
28625 11:25:34 (0) ** 
28626 11:25:34 (0) ** DCOM security for 'Microsoft WMI Provider Subsystem Host' (Launch & Activation Permissions): ........................ MODIFIED.
28627 11:25:34 (1) !! ERROR: Default trustee 'BUILTIN\ADMINISTRATORS' has been REMOVED!
28628 11:25:34 (0) **        - REMOVED ACE:
28629 11:25:34 (0) **          ACEType:  &h0
28630 11:25:34 (0) **                    ACCESS_ALLOWED_ACE_TYPE
28631 11:25:34 (0) **          ACEFlags: &h0
28632 11:25:34 (0) **          ACEMask:  &h1F
28633 11:25:34 (0) **                    DCOM_RIGHT_EXECUTE
28634 11:25:34 (0) **                    DCOM_RIGHT_LAUNCH_LOCAL
28635 11:25:34 (0) **                    DCOM_RIGHT_LAUNCH_REMOTE
28636 11:25:34 (0) **                    DCOM_RIGHT_ACTIVATE_LOCAL
28637 11:25:34 (0) **                    DCOM_RIGHT_ACTIVATE_REMOTE
28638 11:25:34 (0) ** 
28639 11:25:34 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
28640 11:25:34 (0) **    Removing default security will cause some operations to fail!
28641 11:25:34 (0) **    It is possible to fix this issue by editing the security descriptor and adding the ACE.
28642 11:25:34 (0) **    For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
28643 11:25:34 (0) ** 
28644 11:25:34 (0) ** DCOM security for 'Microsoft WMI Provider Subsystem Host' (Launch & Activation Permissions): ........................ MODIFIED.
28645 11:25:34 (1) !! ERROR: Default trustee 'NT AUTHORITY\INTERACTIVE' has been REMOVED!
28646 11:25:34 (0) **        - REMOVED ACE:
28647 11:25:34 (0) **          ACEType:  &h0
28648 11:25:34 (0) **                    ACCESS_ALLOWED_ACE_TYPE
28649 11:25:34 (0) **          ACEFlags: &h0
28650 11:25:34 (0) **          ACEMask:  &h1F
28651 11:25:34 (0) **                    DCOM_RIGHT_EXECUTE
28652 11:25:34 (0) **                    DCOM_RIGHT_LAUNCH_LOCAL
28653 11:25:34 (0) **                    DCOM_RIGHT_LAUNCH_REMOTE
28654 11:25:34 (0) **                    DCOM_RIGHT_ACTIVATE_LOCAL
28655 11:25:34 (0) **                    DCOM_RIGHT_ACTIVATE_REMOTE
28656 11:25:34 (0) ** 
28657 11:25:34 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
28658 11:25:34 (0) **    Removing default security will cause some operations to fail!
28659 11:25:34 (0) **    It is possible to fix this issue by editing the security descriptor and adding the ACE.
28660 11:25:34 (0) **    For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
28661 11:25:34 (0) ** 
28662 11:25:34 (0) ** WMI namespace security for 'Root': .................................................................................. MODIFIED.
28663 11:25:34 (1) !! ERROR: Default trustee 'BUILTIN\ADMINISTRATORS' has been REMOVED!
28664 11:25:34 (0) **        - REMOVED ACE:
28665 11:25:34 (0) **          ACEType:  &h0
28666 11:25:34 (0) **                    ACCESS_ALLOWED_ACE_TYPE
28667 11:25:34 (0) **          ACEFlags: &h12
28668 11:25:34 (0) **                    CONTAINER_INHERIT_ACE
28669 11:25:34 (0) **                    INHERITED_ACE
28670 11:25:34 (0) **          ACEMask:  &h6003F
28671 11:25:34 (0) **                    WBEM_ENABLE
28672 11:25:34 (0) **                    WBEM_METHOD_EXECUTE
28673 11:25:34 (0) **                    WBEM_FULL_WRITE_REP
28674 11:25:34 (0) **                    WBEM_PARTIAL_WRITE_REP
28675 11:25:34 (0) **                    WBEM_WRITE_PROVIDER
28676 11:25:34 (0) **                    WBEM_REMOTE_ACCESS
28677 11:25:34 (0) **                    WBEM_WRITE_DAC
28678 11:25:34 (0) **                    WBEM_READ_CONTROL
28679 11:25:34 (0) ** 
28680 11:25:34 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
28681 11:25:34 (0) **    Removing default security will cause some operations to fail!
28682 11:25:34 (0) **    It is possible to fix this issue by editing the security descriptor and adding the ACE.
28683 11:25:34 (0) **    For WMI namespaces, this can be done with 'WMIMGMT.MSC'.
28684 11:25:34 (0) ** 
28685 11:25:34 (0) ** WMI namespace security for 'Root': .................................................................................. MODIFIED.
28686 11:25:34 (1) !! ERROR: Default trustee 'NT AUTHORITY\AUTHENTICATED USERS' has been REMOVED!
28687 11:25:34 (0) **        - REMOVED ACE:
28688 11:25:34 (0) **          ACEType:  &h0
28689 11:25:34 (0) **                    ACCESS_ALLOWED_ACE_TYPE
28690 11:25:34 (0) **          ACEFlags: &h12
28691 11:25:34 (0) **                    CONTAINER_INHERIT_ACE
28692 11:25:34 (0) **                    INHERITED_ACE
28693 11:25:34 (0) **          ACEMask:  &h13
28694 11:25:34 (0) **                    WBEM_ENABLE
28695 11:25:34 (0) **                    WBEM_METHOD_EXECUTE
28696 11:25:34 (0) **                    WBEM_WRITE_PROVIDER
28697 11:25:34 (0) ** 
28698 11:25:34 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
28699 11:25:34 (0) **    Removing default security will cause some operations to fail!
28700 11:25:34 (0) **    It is possible to fix this issue by editing the security descriptor and adding the ACE.
28701 11:25:34 (0) **    For WMI namespaces, this can be done with 'WMIMGMT.MSC'.
28702 11:25:34 (0) ** 
28703 11:25:34 (0) ** WMI namespace security for 'ROOT/SUBSCRIPTION': ..................................................................... MODIFIED.
28704 11:25:34 (1) !! ERROR: Default trustee 'BUILTIN\ADMINISTRATORS' has been REMOVED!
28705 11:25:34 (0) **        - REMOVED ACE:
28706 11:25:34 (0) **          ACEType:  &h0
28707 11:25:34 (0) **                    ACCESS_ALLOWED_ACE_TYPE
28708 11:25:34 (0) **          ACEFlags: &h12
28709 11:25:34 (0) **                    CONTAINER_INHERIT_ACE
28710 11:25:34 (0) **                    INHERITED_ACE
28711 11:25:34 (0) **          ACEMask:  &h6003F
28712 11:25:34 (0) **                    WBEM_ENABLE
28713 11:25:34 (0) **                    WBEM_METHOD_EXECUTE
28714 11:25:34 (0) **                    WBEM_FULL_WRITE_REP
28715 11:25:34 (0) **                    WBEM_PARTIAL_WRITE_REP
28716 11:25:34 (0) **                    WBEM_WRITE_PROVIDER
28717 11:25:34 (0) **                    WBEM_REMOTE_ACCESS
28718 11:25:34 (0) **                    WBEM_WRITE_DAC
28719 11:25:34 (0) **                    WBEM_READ_CONTROL
28720 11:25:34 (0) ** 
28721 11:25:34 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
28722 11:25:34 (0) **    Removing default security will cause some operations to fail!
28723 11:25:34 (0) **    It is possible to fix this issue by editing the security descriptor and adding the ACE.
28724 11:25:34 (0) **    For WMI namespaces, this can be done with 'WMIMGMT.MSC'.
28725 11:25:34 (0) ** 
28726 11:25:34 (0) ** WMI namespace security for 'ROOT/SUBSCRIPTION': ..................................................................... MODIFIED.
28727 11:25:34 (1) !! ERROR: Default trustee 'NT AUTHORITY\AUTHENTICATED USERS' has been REMOVED!
28728 11:25:34 (0) **        - REMOVED ACE:
28729 11:25:34 (0) **          ACEType:  &h0
28730 11:25:34 (0) **                    ACCESS_ALLOWED_ACE_TYPE
28731 11:25:34 (0) **          ACEFlags: &h12
28732 11:25:34 (0) **                    CONTAINER_INHERIT_ACE
28733 11:25:34 (0) **                    INHERITED_ACE
28734 11:25:34 (0) **          ACEMask:  &h13
28735 11:25:34 (0) **                    WBEM_ENABLE
28736 11:25:34 (0) **                    WBEM_METHOD_EXECUTE
28737 11:25:34 (0) **                    WBEM_WRITE_PROVIDER
28738 11:25:34 (0) ** 
28739 11:25:34 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
28740 11:25:34 (0) **    Removing default security will cause some operations to fail!
28741 11:25:34 (0) **    It is possible to fix this issue by editing the security descriptor and adding the ACE.
28742 11:25:34 (0) **    For WMI namespaces, this can be done with 'WMIMGMT.MSC'.
28743 11:25:34 (0) ** 
28744 11:25:34 (0) ** WMI namespace security for 'ROOT/DEFAULT': .......................................................................... MODIFIED.
28745 11:25:34 (1) !! ERROR: Default trustee 'BUILTIN\ADMINISTRATORS' has been REMOVED!
28746 11:25:34 (0) **        - REMOVED ACE:
28747 11:25:34 (0) **          ACEType:  &h0
28748 11:25:34 (0) **                    ACCESS_ALLOWED_ACE_TYPE
28749 11:25:34 (0) **          ACEFlags: &h12
28750 11:25:34 (0) **                    CONTAINER_INHERIT_ACE
28751 11:25:34 (0) **                    INHERITED_ACE
28752 11:25:34 (0) **          ACEMask:  &h6003F
28753 11:25:34 (0) **                    WBEM_ENABLE
28754 11:25:34 (0) **                    WBEM_METHOD_EXECUTE
28755 11:25:34 (0) **                    WBEM_FULL_WRITE_REP
28756 11:25:34 (0) **                    WBEM_PARTIAL_WRITE_REP
28757 11:25:34 (0) **                    WBEM_WRITE_PROVIDER
28758 11:25:34 (0) **                    WBEM_REMOTE_ACCESS
28759 11:25:34 (0) **                    WBEM_WRITE_DAC
28760 11:25:34 (0) **                    WBEM_READ_CONTROL
28761 11:25:34 (0) ** 
28762 11:25:34 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
28763 11:25:34 (0) **    Removing default security will cause some operations to fail!
28764 11:25:34 (0) **    It is possible to fix this issue by editing the security descriptor and adding the ACE.
28765 11:25:34 (0) **    For WMI namespaces, this can be done with 'WMIMGMT.MSC'.
28766 11:25:34 (0) ** 
28767 11:25:34 (0) ** WMI namespace security for 'ROOT/DEFAULT': .......................................................................... MODIFIED.
28768 11:25:34 (1) !! ERROR: Default trustee 'NT AUTHORITY\AUTHENTICATED USERS' has been REMOVED!
28769 11:25:34 (0) **        - REMOVED ACE:
28770 11:25:34 (0) **          ACEType:  &h0
28771 11:25:34 (0) **                    ACCESS_ALLOWED_ACE_TYPE
28772 11:25:34 (0) **          ACEFlags: &h12
28773 11:25:34 (0) **                    CONTAINER_INHERIT_ACE
28774 11:25:34 (0) **                    INHERITED_ACE
28775 11:25:34 (0) **          ACEMask:  &h13
28776 11:25:34 (0) **                    WBEM_ENABLE
28777 11:25:34 (0) **                    WBEM_METHOD_EXECUTE
28778 11:25:34 (0) **                    WBEM_WRITE_PROVIDER
28779 11:25:34 (0) ** 
28780 11:25:34 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
28781 11:25:34 (0) **    Removing default security will cause some operations to fail!
28782 11:25:34 (0) **    It is possible to fix this issue by editing the security descriptor and adding the ACE.
28783 11:25:34 (0) **    For WMI namespaces, this can be done with 'WMIMGMT.MSC'.
28784 11:25:34 (0) ** 
28785 11:25:34 (0) ** WMI namespace security for 'ROOT/MICROSOFTDFS': ..................................................................... MODIFIED.
28786 11:25:34 (1) !! ERROR: Default trustee 'BUILTIN\ADMINISTRATORS' has been REMOVED!
28787 11:25:34 (0) **        - REMOVED ACE:
28788 11:25:34 (0) **          ACEType:  &h0
28789 11:25:34 (0) **                    ACCESS_ALLOWED_ACE_TYPE
28790 11:25:34 (0) **          ACEFlags: &h12
28791 11:25:34 (0) **                    CONTAINER_INHERIT_ACE
28792 11:25:34 (0) **                    INHERITED_ACE
28793 11:25:34 (0) **          ACEMask:  &h33
28794 11:25:34 (0) **                    WBEM_ENABLE
28795 11:25:34 (0) **                    WBEM_METHOD_EXECUTE
28796 11:25:34 (0) **                    WBEM_WRITE_PROVIDER
28797 11:25:34 (0) **                    WBEM_REMOTE_ACCESS
28798 11:25:34 (0) ** 
28799 11:25:34 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
28800 11:25:34 (0) **    Removing default security will cause some operations to fail!
28801 11:25:34 (0) **    It is possible to fix this issue by editing the security descriptor and adding the ACE.
28802 11:25:34 (0) **    For WMI namespaces, this can be done with 'WMIMGMT.MSC'.
28803 11:25:34 (0) ** 
28804 11:25:34 (0) ** WMI namespace security for 'ROOT/CIMV2': ............................................................................ MODIFIED.
28805 11:25:34 (1) !! ERROR: Default trustee 'BUILTIN\ADMINISTRATORS' has been REMOVED!
28806 11:25:34 (0) **        - REMOVED ACE:
28807 11:25:34 (0) **          ACEType:  &h0
28808 11:25:34 (0) **                    ACCESS_ALLOWED_ACE_TYPE
28809 11:25:34 (0) **          ACEFlags: &h12
28810 11:25:34 (0) **                    CONTAINER_INHERIT_ACE
28811 11:25:34 (0) **                    INHERITED_ACE
28812 11:25:34 (0) **          ACEMask:  &h6003F
28813 11:25:34 (0) **                    WBEM_ENABLE
28814 11:25:34 (0) **                    WBEM_METHOD_EXECUTE
28815 11:25:34 (0) **                    WBEM_FULL_WRITE_REP
28816 11:25:34 (0) **                    WBEM_PARTIAL_WRITE_REP
28817 11:25:34 (0) **                    WBEM_WRITE_PROVIDER
28818 11:25:34 (0) **                    WBEM_REMOTE_ACCESS
28819 11:25:34 (0) **                    WBEM_WRITE_DAC
28820 11:25:34 (0) **                    WBEM_READ_CONTROL
28821 11:25:34 (0) ** 
28822 11:25:34 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
28823 11:25:34 (0) **    Removing default security will cause some operations to fail!
28824 11:25:34 (0) **    It is possible to fix this issue by editing the security descriptor and adding the ACE.
28825 11:25:34 (0) **    For WMI namespaces, this can be done with 'WMIMGMT.MSC'.
28826 11:25:34 (0) ** 
28827 11:25:34 (0) ** WMI namespace security for 'ROOT/CIMV2': ............................................................................ MODIFIED.
28828 11:25:34 (1) !! ERROR: Default trustee 'NT AUTHORITY\AUTHENTICATED USERS' has been REMOVED!
28829 11:25:34 (0) **        - REMOVED ACE:
28830 11:25:34 (0) **          ACEType:  &h0
28831 11:25:34 (0) **                    ACCESS_ALLOWED_ACE_TYPE
28832 11:25:34 (0) **          ACEFlags: &h12
28833 11:25:34 (0) **                    CONTAINER_INHERIT_ACE
28834 11:25:34 (0) **                    INHERITED_ACE
28835 11:25:34 (0) **          ACEMask:  &h13
28836 11:25:34 (0) **                    WBEM_ENABLE
28837 11:25:34 (0) **                    WBEM_METHOD_EXECUTE
28838 11:25:34 (0) **                    WBEM_WRITE_PROVIDER
28839 11:25:34 (0) ** 
28840 11:25:34 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
28841 11:25:34 (0) **    Removing default security will cause some operations to fail!
28842 11:25:34 (0) **    It is possible to fix this issue by editing the security descriptor and adding the ACE.
28843 11:25:34 (0) **    For WMI namespaces, this can be done with 'WMIMGMT.MSC'.
28844 11:25:34 (0) ** 
28845 11:25:34 (0) ** WMI namespace security for 'ROOT/CIMV2/SECURITY': ................................................................... MODIFIED.
28846 11:25:34 (1) !! ERROR: Default trustee 'BUILTIN\ADMINISTRATORS' has been REMOVED!
28847 11:25:34 (0) **        - REMOVED ACE:
28848 11:25:34 (0) **          ACEType:  &h0
28849 11:25:34 (0) **                    ACCESS_ALLOWED_ACE_TYPE
28850 11:25:34 (0) **          ACEFlags: &h12
28851 11:25:34 (0) **                    CONTAINER_INHERIT_ACE
28852 11:25:34 (0) **                    INHERITED_ACE
28853 11:25:34 (0) **          ACEMask:  &h6003F
28854 11:25:34 (0) **                    WBEM_ENABLE
28855 11:25:34 (0) **                    WBEM_METHOD_EXECUTE
28856 11:25:34 (0) **                    WBEM_FULL_WRITE_REP
28857 11:25:34 (0) **                    WBEM_PARTIAL_WRITE_REP
28858 11:25:34 (0) **                    WBEM_WRITE_PROVIDER
28859 11:25:34 (0) **                    WBEM_REMOTE_ACCESS
28860 11:25:34 (0) **                    WBEM_WRITE_DAC
28861 11:25:34 (0) **                    WBEM_READ_CONTROL
28862 11:25:34 (0) ** 
28863 11:25:34 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
28864 11:25:34 (0) **    Removing default security will cause some operations to fail!
28865 11:25:34 (0) **    It is possible to fix this issue by editing the security descriptor and adding the ACE.
28866 11:25:34 (0) **    For WMI namespaces, this can be done with 'WMIMGMT.MSC'.
28867 11:25:34 (0) ** 
28868 11:25:34 (0) ** WMI namespace security for 'ROOT/CIMV2/SECURITY': ................................................................... MODIFIED.
28869 11:25:34 (1) !! ERROR: Default trustee 'NT AUTHORITY\AUTHENTICATED USERS' has been REMOVED!
28870 11:25:34 (0) **        - REMOVED ACE:
28871 11:25:34 (0) **          ACEType:  &h0
28872 11:25:34 (0) **                    ACCESS_ALLOWED_ACE_TYPE
28873 11:25:34 (0) **          ACEFlags: &h12
28874 11:25:34 (0) **                    CONTAINER_INHERIT_ACE
28875 11:25:34 (0) **                    INHERITED_ACE
28876 11:25:34 (0) **          ACEMask:  &h13
28877 11:25:34 (0) **                    WBEM_ENABLE
28878 11:25:34 (0) **                    WBEM_METHOD_EXECUTE
28879 11:25:34 (0) **                    WBEM_WRITE_PROVIDER
28880 11:25:34 (0) ** 
28881 11:25:34 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
28882 11:25:34 (0) **    Removing default security will cause some operations to fail!
28883 11:25:34 (0) **    It is possible to fix this issue by editing the security descriptor and adding the ACE.
28884 11:25:34 (0) **    For WMI namespaces, this can be done with 'WMIMGMT.MSC'.
28885 11:25:34 (0) ** 
28886 11:25:34 (0) ** WMI namespace security for 'ROOT/CIMV2/SECURITY/MICROSOFTTPM': ...................................................... MODIFIED.
28887 11:25:34 (1) !! ERROR: Default trustee 'BUILTIN\ADMINISTRATORS' has been REMOVED!
28888 11:25:34 (0) **        - REMOVED ACE:
28889 11:25:34 (0) **          ACEType:  &h0
28890 11:25:34 (0) **                    ACCESS_ALLOWED_ACE_TYPE
28891 11:25:34 (0) **          ACEFlags: &h12
28892 11:25:34 (0) **                    CONTAINER_INHERIT_ACE
28893 11:25:34 (0) **                    INHERITED_ACE
28894 11:25:34 (0) **          ACEMask:  &h6003F
28895 11:25:34 (0) **                    WBEM_ENABLE
28896 11:25:34 (0) **                    WBEM_METHOD_EXECUTE
28897 11:25:34 (0) **                    WBEM_FULL_WRITE_REP
28898 11:25:34 (0) **                    WBEM_PARTIAL_WRITE_REP
28899 11:25:34 (0) **                    WBEM_WRITE_PROVIDER
28900 11:25:34 (0) **                    WBEM_REMOTE_ACCESS
28901 11:25:34 (0) **                    WBEM_WRITE_DAC
28902 11:25:34 (0) **                    WBEM_READ_CONTROL
28903 11:25:34 (0) ** 
28904 11:25:34 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
28905 11:25:34 (0) **    Removing default security will cause some operations to fail!
28906 11:25:34 (0) **    It is possible to fix this issue by editing the security descriptor and adding the ACE.
28907 11:25:34 (0) **    For WMI namespaces, this can be done with 'WMIMGMT.MSC'.
28908 11:25:34 (0) ** 
28909 11:25:34 (0) ** WMI namespace security for 'ROOT/CIMV2/SECURITY/MICROSOFTVOLUMEENCRYPTION': ......................................... MODIFIED.
28910 11:25:34 (1) !! ERROR: Default trustee 'BUILTIN\ADMINISTRATORS' has been REMOVED!
28911 11:25:34 (0) **        - REMOVED ACE:
28912 11:25:34 (0) **          ACEType:  &h0
28913 11:25:34 (0) **                    ACCESS_ALLOWED_ACE_TYPE
28914 11:25:34 (0) **          ACEFlags: &h12
28915 11:25:34 (0) **                    CONTAINER_INHERIT_ACE
28916 11:25:34 (0) **                    INHERITED_ACE
28917 11:25:34 (0) **          ACEMask:  &h6003F
28918 11:25:34 (0) **                    WBEM_ENABLE
28919 11:25:34 (0) **                    WBEM_METHOD_EXECUTE
28920 11:25:34 (0) **                    WBEM_FULL_WRITE_REP
28921 11:25:34 (0) **                    WBEM_PARTIAL_WRITE_REP
28922 11:25:34 (0) **                    WBEM_WRITE_PROVIDER
28923 11:25:34 (0) **                    WBEM_REMOTE_ACCESS
28924 11:25:34 (0) **                    WBEM_WRITE_DAC
28925 11:25:34 (0) **                    WBEM_READ_CONTROL
28926 11:25:34 (0) ** 
28927 11:25:34 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
28928 11:25:34 (0) **    Removing default security will cause some operations to fail!
28929 11:25:34 (0) **    It is possible to fix this issue by editing the security descriptor and adding the ACE.
28930 11:25:34 (0) **    For WMI namespaces, this can be done with 'WMIMGMT.MSC'.
28931 11:25:34 (0) ** 
28932 11:25:34 (0) ** WMI namespace security for 'ROOT/CIMV2/TERMINALSERVICES': ........................................................... MODIFIED.
28933 11:25:34 (1) !! ERROR: Default trustee 'BUILTIN\ADMINISTRATORS' has been REMOVED!
28934 11:25:34 (0) **        - REMOVED ACE:
28935 11:25:34 (0) **          ACEType:  &h0
28936 11:25:34 (0) **                    ACCESS_ALLOWED_ACE_TYPE
28937 11:25:34 (0) **          ACEFlags: &h12
28938 11:25:34 (0) **                    CONTAINER_INHERIT_ACE
28939 11:25:34 (0) **                    INHERITED_ACE
28940 11:25:34 (0) **          ACEMask:  &h6003F
28941 11:25:34 (0) **                    WBEM_ENABLE
28942 11:25:34 (0) **                    WBEM_METHOD_EXECUTE
28943 11:25:34 (0) **                    WBEM_FULL_WRITE_REP
28944 11:25:34 (0) **                    WBEM_PARTIAL_WRITE_REP
28945 11:25:34 (0) **                    WBEM_WRITE_PROVIDER
28946 11:25:34 (0) **                    WBEM_REMOTE_ACCESS
28947 11:25:34 (0) **                    WBEM_WRITE_DAC
28948 11:25:34 (0) **                    WBEM_READ_CONTROL
28949 11:25:34 (0) ** 
28950 11:25:34 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
28951 11:25:34 (0) **    Removing default security will cause some operations to fail!
28952 11:25:34 (0) **    It is possible to fix this issue by editing the security descriptor and adding the ACE.
28953 11:25:34 (0) **    For WMI namespaces, this can be done with 'WMIMGMT.MSC'.
28954 11:25:34 (0) ** 
28955 11:25:34 (0) ** WMI namespace security for 'ROOT/CIMV2/TERMINALSERVICES': ........................................................... MODIFIED.
28956 11:25:34 (1) !! ERROR: Default trustee 'NT AUTHORITY\AUTHENTICATED USERS' has been REMOVED!
28957 11:25:34 (0) **        - REMOVED ACE:
28958 11:25:34 (0) **          ACEType:  &h0
28959 11:25:34 (0) **                    ACCESS_ALLOWED_ACE_TYPE
28960 11:25:34 (0) **          ACEFlags: &h12
28961 11:25:34 (0) **                    CONTAINER_INHERIT_ACE
28962 11:25:34 (0) **                    INHERITED_ACE
28963 11:25:34 (0) **          ACEMask:  &h13
28964 11:25:34 (0) **                    WBEM_ENABLE
28965 11:25:34 (0) **                    WBEM_METHOD_EXECUTE
28966 11:25:34 (0) **                    WBEM_WRITE_PROVIDER
28967 11:25:34 (0) ** 
28968 11:25:34 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
28969 11:25:34 (0) **    Removing default security will cause some operations to fail!
28970 11:25:34 (0) **    It is possible to fix this issue by editing the security descriptor and adding the ACE.
28971 11:25:34 (0) **    For WMI namespaces, this can be done with 'WMIMGMT.MSC'.
28972 11:25:34 (0) ** 
28973 11:25:34 (0) ** WMI namespace security for 'ROOT/CLI': .............................................................................. MODIFIED.
28974 11:25:34 (1) !! ERROR: Default trustee 'BUILTIN\ADMINISTRATORS' has been REMOVED!
28975 11:25:34 (0) **        - REMOVED ACE:
28976 11:25:34 (0) **          ACEType:  &h0
28977 11:25:34 (0) **                    ACCESS_ALLOWED_ACE_TYPE
28978 11:25:34 (0) **          ACEFlags: &h12
28979 11:25:34 (0) **                    CONTAINER_INHERIT_ACE
28980 11:25:34 (0) **                    INHERITED_ACE
28981 11:25:34 (0) **          ACEMask:  &h6003F
28982 11:25:34 (0) **                    WBEM_ENABLE
28983 11:25:34 (0) **                    WBEM_METHOD_EXECUTE
28984 11:25:34 (0) **                    WBEM_FULL_WRITE_REP
28985 11:25:34 (0) **                    WBEM_PARTIAL_WRITE_REP
28986 11:25:34 (0) **                    WBEM_WRITE_PROVIDER
28987 11:25:34 (0) **                    WBEM_REMOTE_ACCESS
28988 11:25:34 (0) **                    WBEM_WRITE_DAC
28989 11:25:34 (0) **                    WBEM_READ_CONTROL
28990 11:25:34 (0) ** 
28991 11:25:34 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
28992 11:25:34 (0) **    Removing default security will cause some operations to fail!
28993 11:25:34 (0) **    It is possible to fix this issue by editing the security descriptor and adding the ACE.
28994 11:25:34 (0) **    For WMI namespaces, this can be done with 'WMIMGMT.MSC'.
28995 11:25:34 (0) ** 
28996 11:25:34 (0) ** WMI namespace security for 'ROOT/CLI': .............................................................................. MODIFIED.
28997 11:25:34 (1) !! ERROR: Default trustee 'NT AUTHORITY\AUTHENTICATED USERS' has been REMOVED!
28998 11:25:34 (0) **        - REMOVED ACE:
28999 11:25:34 (0) **          ACEType:  &h0
29000 11:25:34 (0) **                    ACCESS_ALLOWED_ACE_TYPE
29001 11:25:34 (0) **          ACEFlags: &h12
29002 11:25:34 (0) **                    CONTAINER_INHERIT_ACE
29003 11:25:34 (0) **                    INHERITED_ACE
29004 11:25:34 (0) **          ACEMask:  &h13
29005 11:25:34 (0) **                    WBEM_ENABLE
29006 11:25:34 (0) **                    WBEM_METHOD_EXECUTE
29007 11:25:34 (0) **                    WBEM_WRITE_PROVIDER
29008 11:25:34 (0) ** 
29009 11:25:34 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
29010 11:25:34 (0) **    Removing default security will cause some operations to fail!
29011 11:25:34 (0) **    It is possible to fix this issue by editing the security descriptor and adding the ACE.
29012 11:25:34 (0) **    For WMI namespaces, this can be done with 'WMIMGMT.MSC'.
29013 11:25:34 (0) ** 
29014 11:25:34 (0) ** WMI namespace security for 'ROOT/NAP': .............................................................................. MODIFIED.
29015 11:25:34 (1) !! ERROR: Default trustee 'BUILTIN\ADMINISTRATORS' has been REMOVED!
29016 11:25:34 (0) **        - REMOVED ACE:
29017 11:25:34 (0) **          ACEType:  &h0
29018 11:25:34 (0) **                    ACCESS_ALLOWED_ACE_TYPE
29019 11:25:34 (0) **          ACEFlags: &h12
29020 11:25:34 (0) **                    CONTAINER_INHERIT_ACE
29021 11:25:34 (0) **                    INHERITED_ACE
29022 11:25:34 (0) **          ACEMask:  &h6003F
29023 11:25:34 (0) **                    WBEM_ENABLE
29024 11:25:34 (0) **                    WBEM_METHOD_EXECUTE
29025 11:25:34 (0) **                    WBEM_FULL_WRITE_REP
29026 11:25:34 (0) **                    WBEM_PARTIAL_WRITE_REP
29027 11:25:34 (0) **                    WBEM_WRITE_PROVIDER
29028 11:25:34 (0) **                    WBEM_REMOTE_ACCESS
29029 11:25:34 (0) **                    WBEM_WRITE_DAC
29030 11:25:34 (0) **                    WBEM_READ_CONTROL
29031 11:25:34 (0) ** 
29032 11:25:34 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
29033 11:25:34 (0) **    Removing default security will cause some operations to fail!
29034 11:25:34 (0) **    It is possible to fix this issue by editing the security descriptor and adding the ACE.
29035 11:25:34 (0) **    For WMI namespaces, this can be done with 'WMIMGMT.MSC'.
29036 11:25:34 (0) ** 
29037 11:25:34 (0) ** WMI namespace security for 'ROOT/NAP': .............................................................................. MODIFIED.
29038 11:25:34 (1) !! ERROR: Default trustee 'NT AUTHORITY\AUTHENTICATED USERS' has been REMOVED!
29039 11:25:34 (0) **        - REMOVED ACE:
29040 11:25:34 (0) **          ACEType:  &h0
29041 11:25:34 (0) **                    ACCESS_ALLOWED_ACE_TYPE
29042 11:25:34 (0) **          ACEFlags: &h12
29043 11:25:34 (0) **                    CONTAINER_INHERIT_ACE
29044 11:25:34 (0) **                    INHERITED_ACE
29045 11:25:34 (0) **          ACEMask:  &h13
29046 11:25:34 (0) **                    WBEM_ENABLE
29047 11:25:34 (0) **                    WBEM_METHOD_EXECUTE
29048 11:25:34 (0) **                    WBEM_WRITE_PROVIDER
29049 11:25:34 (0) ** 
29050 11:25:34 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
29051 11:25:34 (0) **    Removing default security will cause some operations to fail!
29052 11:25:34 (0) **    It is possible to fix this issue by editing the security descriptor and adding the ACE.
29053 11:25:34 (0) **    For WMI namespaces, this can be done with 'WMIMGMT.MSC'.
29054 11:25:34 (0) ** 
29055 11:25:34 (0) ** WMI namespace security for 'ROOT/SECURITY': ......................................................................... MODIFIED.
29056 11:25:34 (1) !! ERROR: Default trustee 'BUILTIN\ADMINISTRATORS' has been REMOVED!
29057 11:25:34 (0) **        - REMOVED ACE:
29058 11:25:34 (0) **          ACEType:  &h0
29059 11:25:34 (0) **                    ACCESS_ALLOWED_ACE_TYPE
29060 11:25:34 (0) **          ACEFlags: &h12
29061 11:25:34 (0) **                    CONTAINER_INHERIT_ACE
29062 11:25:34 (0) **                    INHERITED_ACE
29063 11:25:34 (0) **          ACEMask:  &h6003F
29064 11:25:34 (0) **                    WBEM_ENABLE
29065 11:25:34 (0) **                    WBEM_METHOD_EXECUTE
29066 11:25:34 (0) **                    WBEM_FULL_WRITE_REP
29067 11:25:34 (0) **                    WBEM_PARTIAL_WRITE_REP
29068 11:25:34 (0) **                    WBEM_WRITE_PROVIDER
29069 11:25:34 (0) **                    WBEM_REMOTE_ACCESS
29070 11:25:34 (0) **                    WBEM_WRITE_DAC
29071 11:25:34 (0) **                    WBEM_READ_CONTROL
29072 11:25:34 (0) ** 
29073 11:25:34 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
29074 11:25:34 (0) **    Removing default security will cause some operations to fail!
29075 11:25:34 (0) **    It is possible to fix this issue by editing the security descriptor and adding the ACE.
29076 11:25:34 (0) **    For WMI namespaces, this can be done with 'WMIMGMT.MSC'.
29077 11:25:34 (0) ** 
29078 11:25:34 (0) ** WMI namespace security for 'ROOT/SECURITY': ......................................................................... MODIFIED.
29079 11:25:34 (1) !! ERROR: Default trustee 'NT AUTHORITY\AUTHENTICATED USERS' has been REMOVED!
29080 11:25:34 (0) **        - REMOVED ACE:
29081 11:25:34 (0) **          ACEType:  &h0
29082 11:25:34 (0) **                    ACCESS_ALLOWED_ACE_TYPE
29083 11:25:34 (0) **          ACEFlags: &h12
29084 11:25:34 (0) **                    CONTAINER_INHERIT_ACE
29085 11:25:34 (0) **                    INHERITED_ACE
29086 11:25:34 (0) **          ACEMask:  &h13
29087 11:25:34 (0) **                    WBEM_ENABLE
29088 11:25:34 (0) **                    WBEM_METHOD_EXECUTE
29089 11:25:34 (0) **                    WBEM_WRITE_PROVIDER
29090 11:25:34 (0) ** 
29091 11:25:34 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
29092 11:25:34 (0) **    Removing default security will cause some operations to fail!
29093 11:25:34 (0) **    It is possible to fix this issue by editing the security descriptor and adding the ACE.
29094 11:25:34 (0) **    For WMI namespaces, this can be done with 'WMIMGMT.MSC'.
29095 11:25:34 (0) ** 
29096 11:25:34 (0) ** WMI namespace security for 'ROOT/RSOP': ............................................................................. MODIFIED.
29097 11:25:34 (1) !! ERROR: Default trustee 'BUILTIN\ADMINISTRATORS' has been REMOVED!
29098 11:25:34 (0) **        - REMOVED ACE:
29099 11:25:34 (0) **          ACEType:  &h0
29100 11:25:34 (0) **                    ACCESS_ALLOWED_ACE_TYPE
29101 11:25:34 (0) **          ACEFlags: &h12
29102 11:25:34 (0) **                    CONTAINER_INHERIT_ACE
29103 11:25:34 (0) **                    INHERITED_ACE
29104 11:25:34 (0) **          ACEMask:  &h6003F
29105 11:25:34 (0) **                    WBEM_ENABLE
29106 11:25:34 (0) **                    WBEM_METHOD_EXECUTE
29107 11:25:34 (0) **                    WBEM_FULL_WRITE_REP
29108 11:25:34 (0) **                    WBEM_PARTIAL_WRITE_REP
29109 11:25:34 (0) **                    WBEM_WRITE_PROVIDER
29110 11:25:34 (0) **                    WBEM_REMOTE_ACCESS
29111 11:25:34 (0) **                    WBEM_WRITE_DAC
29112 11:25:34 (0) **                    WBEM_READ_CONTROL
29113 11:25:34 (0) ** 
29114 11:25:34 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
29115 11:25:34 (0) **    Removing default security will cause some operations to fail!
29116 11:25:34 (0) **    It is possible to fix this issue by editing the security descriptor and adding the ACE.
29117 11:25:34 (0) **    For WMI namespaces, this can be done with 'WMIMGMT.MSC'.
29118 11:25:34 (0) ** 
29119 11:25:34 (0) ** WMI namespace security for 'ROOT/RSOP': ............................................................................. MODIFIED.
29120 11:25:34 (1) !! ERROR: Default trustee 'NT AUTHORITY\AUTHENTICATED USERS' has been REMOVED!
29121 11:25:34 (0) **        - REMOVED ACE:
29122 11:25:34 (0) **          ACEType:  &h0
29123 11:25:34 (0) **                    ACCESS_ALLOWED_ACE_TYPE
29124 11:25:34 (0) **          ACEFlags: &h12
29125 11:25:34 (0) **                    CONTAINER_INHERIT_ACE
29126 11:25:34 (0) **                    INHERITED_ACE
29127 11:25:34 (0) **          ACEMask:  &h23
29128 11:25:34 (0) **                    WBEM_ENABLE
29129 11:25:34 (0) **                    WBEM_METHOD_EXECUTE
29130 11:25:34 (0) **                    WBEM_REMOTE_ACCESS
29131 11:25:34 (0) ** 
29132 11:25:34 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
29133 11:25:34 (0) **    Removing default security will cause some operations to fail!
29134 11:25:34 (0) **    It is possible to fix this issue by editing the security descriptor and adding the ACE.
29135 11:25:34 (0) **    For WMI namespaces, this can be done with 'WMIMGMT.MSC'.
29136 11:25:34 (0) ** 
29137 11:25:34 (0) ** WMI namespace security for 'ROOT/RSOP/USER': ........................................................................ MODIFIED.
29138 11:25:34 (1) !! ERROR: Default trustee 'BUILTIN\ADMINISTRATORS' has been REMOVED!
29139 11:25:34 (0) **        - REMOVED ACE:
29140 11:25:34 (0) **          ACEType:  &h0
29141 11:25:34 (0) **                    ACCESS_ALLOWED_ACE_TYPE
29142 11:25:34 (0) **          ACEFlags: &h12
29143 11:25:34 (0) **                    CONTAINER_INHERIT_ACE
29144 11:25:34 (0) **                    INHERITED_ACE
29145 11:25:34 (0) **          ACEMask:  &h6003F
29146 11:25:34 (0) **                    WBEM_ENABLE
29147 11:25:34 (0) **                    WBEM_METHOD_EXECUTE
29148 11:25:34 (0) **                    WBEM_FULL_WRITE_REP
29149 11:25:34 (0) **                    WBEM_PARTIAL_WRITE_REP
29150 11:25:34 (0) **                    WBEM_WRITE_PROVIDER
29151 11:25:34 (0) **                    WBEM_REMOTE_ACCESS
29152 11:25:34 (0) **                    WBEM_WRITE_DAC
29153 11:25:34 (0) **                    WBEM_READ_CONTROL
29154 11:25:34 (0) ** 
29155 11:25:34 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
29156 11:25:34 (0) **    Removing default security will cause some operations to fail!
29157 11:25:34 (0) **    It is possible to fix this issue by editing the security descriptor and adding the ACE.
29158 11:25:34 (0) **    For WMI namespaces, this can be done with 'WMIMGMT.MSC'.
29159 11:25:34 (0) ** 
29160 11:25:34 (0) ** WMI namespace security for 'ROOT/RSOP/COMPUTER': .................................................................... MODIFIED.
29161 11:25:34 (1) !! ERROR: Default trustee 'BUILTIN\ADMINISTRATORS' has been REMOVED!
29162 11:25:34 (0) **        - REMOVED ACE:
29163 11:25:34 (0) **          ACEType:  &h0
29164 11:25:34 (0) **                    ACCESS_ALLOWED_ACE_TYPE
29165 11:25:34 (0) **          ACEFlags: &h12
29166 11:25:34 (0) **                    CONTAINER_INHERIT_ACE
29167 11:25:34 (0) **                    INHERITED_ACE
29168 11:25:34 (0) **          ACEMask:  &h6003F
29169 11:25:34 (0) **                    WBEM_ENABLE
29170 11:25:34 (0) **                    WBEM_METHOD_EXECUTE
29171 11:25:34 (0) **                    WBEM_FULL_WRITE_REP
29172 11:25:34 (0) **                    WBEM_PARTIAL_WRITE_REP
29173 11:25:34 (0) **                    WBEM_WRITE_PROVIDER
29174 11:25:34 (0) **                    WBEM_REMOTE_ACCESS
29175 11:25:34 (0) **                    WBEM_WRITE_DAC
29176 11:25:34 (0) **                    WBEM_READ_CONTROL
29177 11:25:34 (0) ** 
29178 11:25:34 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
29179 11:25:34 (0) **    Removing default security will cause some operations to fail!
29180 11:25:34 (0) **    It is possible to fix this issue by editing the security descriptor and adding the ACE.
29181 11:25:34 (0) **    For WMI namespaces, this can be done with 'WMIMGMT.MSC'.
29182 11:25:34 (0) ** 
29183 11:25:34 (0) ** WMI namespace security for 'ROOT/WMI': .............................................................................. MODIFIED.
29184 11:25:34 (1) !! ERROR: Default trustee 'BUILTIN\ADMINISTRATORS' has been REMOVED!
29185 11:25:34 (0) **        - REMOVED ACE:
29186 11:25:34 (0) **          ACEType:  &h0
29187 11:25:34 (0) **                    ACCESS_ALLOWED_ACE_TYPE
29188 11:25:34 (0) **          ACEFlags: &h12
29189 11:25:34 (0) **                    CONTAINER_INHERIT_ACE
29190 11:25:34 (0) **                    INHERITED_ACE
29191 11:25:34 (0) **          ACEMask:  &h6003F
29192 11:25:34 (0) **                    WBEM_ENABLE
29193 11:25:34 (0) **                    WBEM_METHOD_EXECUTE
29194 11:25:34 (0) **                    WBEM_FULL_WRITE_REP
29195 11:25:34 (0) **                    WBEM_PARTIAL_WRITE_REP
29196 11:25:34 (0) **                    WBEM_WRITE_PROVIDER
29197 11:25:34 (0) **                    WBEM_REMOTE_ACCESS
29198 11:25:34 (0) **                    WBEM_WRITE_DAC
29199 11:25:34 (0) **                    WBEM_READ_CONTROL
29200 11:25:34 (0) ** 
29201 11:25:34 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
29202 11:25:34 (0) **    Removing default security will cause some operations to fail!
29203 11:25:34 (0) **    It is possible to fix this issue by editing the security descriptor and adding the ACE.
29204 11:25:34 (0) **    For WMI namespaces, this can be done with 'WMIMGMT.MSC'.
29205 11:25:34 (0) ** 
29206 11:25:34 (0) ** WMI namespace security for 'ROOT/WMI': .............................................................................. MODIFIED.
29207 11:25:34 (1) !! ERROR: Default trustee 'NT AUTHORITY\AUTHENTICATED USERS' has been REMOVED!
29208 11:25:34 (0) **        - REMOVED ACE:
29209 11:25:34 (0) **          ACEType:  &h0
29210 11:25:34 (0) **                    ACCESS_ALLOWED_ACE_TYPE
29211 11:25:34 (0) **          ACEFlags: &h12
29212 11:25:34 (0) **                    CONTAINER_INHERIT_ACE
29213 11:25:34 (0) **                    INHERITED_ACE
29214 11:25:34 (0) **          ACEMask:  &h13
29215 11:25:34 (0) **                    WBEM_ENABLE
29216 11:25:34 (0) **                    WBEM_METHOD_EXECUTE
29217 11:25:34 (0) **                    WBEM_WRITE_PROVIDER
29218 11:25:34 (0) ** 
29219 11:25:34 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
29220 11:25:34 (0) **    Removing default security will cause some operations to fail!
29221 11:25:34 (0) **    It is possible to fix this issue by editing the security descriptor and adding the ACE.
29222 11:25:34 (0) **    For WMI namespaces, this can be done with 'WMIMGMT.MSC'.
29223 11:25:34 (0) ** 
29224 11:25:34 (0) ** WMI namespace security for 'ROOT/DIRECTORY': ........................................................................ MODIFIED.
29225 11:25:34 (1) !! ERROR: Default trustee 'BUILTIN\ADMINISTRATORS' has been REMOVED!
29226 11:25:34 (0) **        - REMOVED ACE:
29227 11:25:34 (0) **          ACEType:  &h0
29228 11:25:34 (0) **                    ACCESS_ALLOWED_ACE_TYPE
29229 11:25:34 (0) **          ACEFlags: &h12
29230 11:25:34 (0) **                    CONTAINER_INHERIT_ACE
29231 11:25:34 (0) **                    INHERITED_ACE
29232 11:25:34 (0) **          ACEMask:  &h6003F
29233 11:25:34 (0) **                    WBEM_ENABLE
29234 11:25:34 (0) **                    WBEM_METHOD_EXECUTE
29235 11:25:34 (0) **                    WBEM_FULL_WRITE_REP
29236 11:25:34 (0) **                    WBEM_PARTIAL_WRITE_REP
29237 11:25:34 (0) **                    WBEM_WRITE_PROVIDER
29238 11:25:34 (0) **                    WBEM_REMOTE_ACCESS
29239 11:25:34 (0) **                    WBEM_WRITE_DAC
29240 11:25:34 (0) **                    WBEM_READ_CONTROL
29241 11:25:34 (0) ** 
29242 11:25:34 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
29243 11:25:34 (0) **    Removing default security will cause some operations to fail!
29244 11:25:34 (0) **    It is possible to fix this issue by editing the security descriptor and adding the ACE.
29245 11:25:34 (0) **    For WMI namespaces, this can be done with 'WMIMGMT.MSC'.
29246 11:25:34 (0) ** 
29247 11:25:34 (0) ** WMI namespace security for 'ROOT/DIRECTORY': ........................................................................ MODIFIED.
29248 11:25:34 (1) !! ERROR: Default trustee 'NT AUTHORITY\AUTHENTICATED USERS' has been REMOVED!
29249 11:25:34 (0) **        - REMOVED ACE:
29250 11:25:34 (0) **          ACEType:  &h0
29251 11:25:34 (0) **                    ACCESS_ALLOWED_ACE_TYPE
29252 11:25:34 (0) **          ACEFlags: &h12
29253 11:25:34 (0) **                    CONTAINER_INHERIT_ACE
29254 11:25:34 (0) **                    INHERITED_ACE
29255 11:25:34 (0) **          ACEMask:  &h13
29256 11:25:34 (0) **                    WBEM_ENABLE
29257 11:25:34 (0) **                    WBEM_METHOD_EXECUTE
29258 11:25:34 (0) **                    WBEM_WRITE_PROVIDER
29259 11:25:34 (0) ** 
29260 11:25:34 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
29261 11:25:34 (0) **    Removing default security will cause some operations to fail!
29262 11:25:34 (0) **    It is possible to fix this issue by editing the security descriptor and adding the ACE.
29263 11:25:34 (0) **    For WMI namespaces, this can be done with 'WMIMGMT.MSC'.
29264 11:25:34 (0) ** 
29265 11:25:34 (0) ** WMI namespace security for 'ROOT/DIRECTORY/LDAP': ................................................................... MODIFIED.
29266 11:25:34 (1) !! ERROR: Default trustee 'BUILTIN\ADMINISTRATORS' has been REMOVED!
29267 11:25:34 (0) **        - REMOVED ACE:
29268 11:25:34 (0) **          ACEType:  &h0
29269 11:25:34 (0) **                    ACCESS_ALLOWED_ACE_TYPE
29270 11:25:34 (0) **          ACEFlags: &h12
29271 11:25:34 (0) **                    CONTAINER_INHERIT_ACE
29272 11:25:34 (0) **                    INHERITED_ACE
29273 11:25:34 (0) **          ACEMask:  &h6003F
29274 11:25:34 (0) **                    WBEM_ENABLE
29275 11:25:34 (0) **                    WBEM_METHOD_EXECUTE
29276 11:25:34 (0) **                    WBEM_FULL_WRITE_REP
29277 11:25:34 (0) **                    WBEM_PARTIAL_WRITE_REP
29278 11:25:34 (0) **                    WBEM_WRITE_PROVIDER
29279 11:25:34 (0) **                    WBEM_REMOTE_ACCESS
29280 11:25:34 (0) **                    WBEM_WRITE_DAC
29281 11:25:34 (0) **                    WBEM_READ_CONTROL
29282 11:25:34 (0) ** 
29283 11:25:34 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
29284 11:25:34 (0) **    Removing default security will cause some operations to fail!
29285 11:25:34 (0) **    It is possible to fix this issue by editing the security descriptor and adding the ACE.
29286 11:25:34 (0) **    For WMI namespaces, this can be done with 'WMIMGMT.MSC'.
29287 11:25:34 (0) ** 
29288 11:25:34 (0) ** WMI namespace security for 'ROOT/DIRECTORY/LDAP': ................................................................... MODIFIED.
29289 11:25:34 (1) !! ERROR: Default trustee 'NT AUTHORITY\AUTHENTICATED USERS' has been REMOVED!
29290 11:25:34 (0) **        - REMOVED ACE:
29291 11:25:34 (0) **          ACEType:  &h0
29292 11:25:34 (0) **                    ACCESS_ALLOWED_ACE_TYPE
29293 11:25:34 (0) **          ACEFlags: &h12
29294 11:25:34 (0) **                    CONTAINER_INHERIT_ACE
29295 11:25:34 (0) **                    INHERITED_ACE
29296 11:25:34 (0) **          ACEMask:  &h13
29297 11:25:34 (0) **                    WBEM_ENABLE
29298 11:25:34 (0) **                    WBEM_METHOD_EXECUTE
29299 11:25:34 (0) **                    WBEM_WRITE_PROVIDER
29300 11:25:34 (0) ** 
29301 11:25:34 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
29302 11:25:34 (0) **    Removing default security will cause some operations to fail!
29303 11:25:34 (0) **    It is possible to fix this issue by editing the security descriptor and adding the ACE.
29304 11:25:34 (0) **    For WMI namespaces, this can be done with 'WMIMGMT.MSC'.
29305 11:25:34 (0) ** 
29306 11:25:34 (0) ** WMI namespace security for 'ROOT/POLICY': ........................................................................... MODIFIED.
29307 11:25:34 (1) !! ERROR: Default trustee 'BUILTIN\ADMINISTRATORS' has been REMOVED!
29308 11:25:34 (0) **        - REMOVED ACE:
29309 11:25:34 (0) **          ACEType:  &h0
29310 11:25:34 (0) **                    ACCESS_ALLOWED_ACE_TYPE
29311 11:25:34 (0) **          ACEFlags: &h12
29312 11:25:34 (0) **                    CONTAINER_INHERIT_ACE
29313 11:25:34 (0) **                    INHERITED_ACE
29314 11:25:34 (0) **          ACEMask:  &h6003F
29315 11:25:34 (0) **                    WBEM_ENABLE
29316 11:25:34 (0) **                    WBEM_METHOD_EXECUTE
29317 11:25:34 (0) **                    WBEM_FULL_WRITE_REP
29318 11:25:34 (0) **                    WBEM_PARTIAL_WRITE_REP
29319 11:25:34 (0) **                    WBEM_WRITE_PROVIDER
29320 11:25:34 (0) **                    WBEM_REMOTE_ACCESS
29321 11:25:34 (0) **                    WBEM_WRITE_DAC
29322 11:25:34 (0) **                    WBEM_READ_CONTROL
29323 11:25:34 (0) ** 
29324 11:25:34 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
29325 11:25:34 (0) **    Removing default security will cause some operations to fail!
29326 11:25:34 (0) **    It is possible to fix this issue by editing the security descriptor and adding the ACE.
29327 11:25:34 (0) **    For WMI namespaces, this can be done with 'WMIMGMT.MSC'.
29328 11:25:34 (0) ** 
29329 11:25:34 (0) ** WMI namespace security for 'ROOT/POLICY': ........................................................................... MODIFIED.
29330 11:25:34 (1) !! ERROR: Default trustee 'NT AUTHORITY\AUTHENTICATED USERS' has been REMOVED!
29331 11:25:34 (0) **        - REMOVED ACE:
29332 11:25:34 (0) **          ACEType:  &h0
29333 11:25:34 (0) **                    ACCESS_ALLOWED_ACE_TYPE
29334 11:25:34 (0) **          ACEFlags: &h12
29335 11:25:34 (0) **                    CONTAINER_INHERIT_ACE
29336 11:25:34 (0) **                    INHERITED_ACE
29337 11:25:34 (0) **          ACEMask:  &h13
29338 11:25:34 (0) **                    WBEM_ENABLE
29339 11:25:34 (0) **                    WBEM_METHOD_EXECUTE
29340 11:25:34 (0) **                    WBEM_WRITE_PROVIDER
29341 11:25:34 (0) ** 
29342 11:25:34 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
29343 11:25:34 (0) **    Removing default security will cause some operations to fail!
29344 11:25:34 (0) **    It is possible to fix this issue by editing the security descriptor and adding the ACE.
29345 11:25:34 (0) **    For WMI namespaces, this can be done with 'WMIMGMT.MSC'.
29346 11:25:34 (0) ** 
29347 11:25:34 (0) ** WMI namespace security for 'ROOT/SERVICEMODEL': ..................................................................... MODIFIED.
29348 11:25:34 (1) !! ERROR: Default trustee 'BUILTIN\ADMINISTRATORS' has been REMOVED!
29349 11:25:34 (0) **        - REMOVED ACE:
29350 11:25:34 (0) **          ACEType:  &h0
29351 11:25:34 (0) **                    ACCESS_ALLOWED_ACE_TYPE
29352 11:25:34 (0) **          ACEFlags: &h12
29353 11:25:34 (0) **                    CONTAINER_INHERIT_ACE
29354 11:25:34 (0) **                    INHERITED_ACE
29355 11:25:34 (0) **          ACEMask:  &h6003F
29356 11:25:34 (0) **                    WBEM_ENABLE
29357 11:25:34 (0) **                    WBEM_METHOD_EXECUTE
29358 11:25:34 (0) **                    WBEM_FULL_WRITE_REP
29359 11:25:34 (0) **                    WBEM_PARTIAL_WRITE_REP
29360 11:25:34 (0) **                    WBEM_WRITE_PROVIDER
29361 11:25:34 (0) **                    WBEM_REMOTE_ACCESS
29362 11:25:34 (0) **                    WBEM_WRITE_DAC
29363 11:25:34 (0) **                    WBEM_READ_CONTROL
29364 11:25:34 (0) ** 
29365 11:25:34 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
29366 11:25:34 (0) **    Removing default security will cause some operations to fail!
29367 11:25:34 (0) **    It is possible to fix this issue by editing the security descriptor and adding the ACE.
29368 11:25:34 (0) **    For WMI namespaces, this can be done with 'WMIMGMT.MSC'.
29369 11:25:34 (0) ** 
29370 11:25:34 (0) ** WMI namespace security for 'ROOT/MSAPPS12': ......................................................................... MODIFIED.
29371 11:25:34 (1) !! ERROR: Default trustee 'BUILTIN\ADMINISTRATORS' has been REMOVED!
29372 11:25:34 (0) **        - REMOVED ACE:
29373 11:25:34 (0) **          ACEType:  &h0
29374 11:25:34 (0) **                    ACCESS_ALLOWED_ACE_TYPE
29375 11:25:34 (0) **          ACEFlags: &h12
29376 11:25:34 (0) **                    CONTAINER_INHERIT_ACE
29377 11:25:34 (0) **                    INHERITED_ACE
29378 11:25:34 (0) **          ACEMask:  &h6003F
29379 11:25:34 (0) **                    WBEM_ENABLE
29380 11:25:34 (0) **                    WBEM_METHOD_EXECUTE
29381 11:25:34 (0) **                    WBEM_FULL_WRITE_REP
29382 11:25:34 (0) **                    WBEM_PARTIAL_WRITE_REP
29383 11:25:34 (0) **                    WBEM_WRITE_PROVIDER
29384 11:25:34 (0) **                    WBEM_REMOTE_ACCESS
29385 11:25:34 (0) **                    WBEM_WRITE_DAC
29386 11:25:34 (0) **                    WBEM_READ_CONTROL
29387 11:25:34 (0) ** 
29388 11:25:34 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
29389 11:25:34 (0) **    Removing default security will cause some operations to fail!
29390 11:25:34 (0) **    It is possible to fix this issue by editing the security descriptor and adding the ACE.
29391 11:25:34 (0) **    For WMI namespaces, this can be done with 'WMIMGMT.MSC'.
29392 11:25:34 (0) ** 
29393 11:25:34 (0) ** WMI namespace security for 'ROOT/MSAPPS12': ......................................................................... MODIFIED.
29394 11:25:34 (1) !! ERROR: Default trustee 'NT AUTHORITY\AUTHENTICATED USERS' has been REMOVED!
29395 11:25:34 (0) **        - REMOVED ACE:
29396 11:25:34 (0) **          ACEType:  &h0
29397 11:25:34 (0) **                    ACCESS_ALLOWED_ACE_TYPE
29398 11:25:34 (0) **          ACEFlags: &h12
29399 11:25:34 (0) **                    CONTAINER_INHERIT_ACE
29400 11:25:34 (0) **                    INHERITED_ACE
29401 11:25:34 (0) **          ACEMask:  &h13
29402 11:25:34 (0) **                    WBEM_ENABLE
29403 11:25:34 (0) **                    WBEM_METHOD_EXECUTE
29404 11:25:34 (0) **                    WBEM_WRITE_PROVIDER
29405 11:25:34 (0) ** 
29406 11:25:34 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
29407 11:25:34 (0) **    Removing default security will cause some operations to fail!
29408 11:25:34 (0) **    It is possible to fix this issue by editing the security descriptor and adding the ACE.
29409 11:25:34 (0) **    For WMI namespaces, this can be done with 'WMIMGMT.MSC'.
29410 11:25:34 (0) ** 
29411 11:25:34 (0) ** WMI namespace security for 'ROOT/MICROSOFT': ........................................................................ MODIFIED.
29412 11:25:34 (1) !! ERROR: Default trustee 'BUILTIN\ADMINISTRATORS' has been REMOVED!
29413 11:25:34 (0) **        - REMOVED ACE:
29414 11:25:34 (0) **          ACEType:  &h0
29415 11:25:34 (0) **                    ACCESS_ALLOWED_ACE_TYPE
29416 11:25:34 (0) **          ACEFlags: &h12
29417 11:25:34 (0) **                    CONTAINER_INHERIT_ACE
29418 11:25:34 (0) **                    INHERITED_ACE
29419 11:25:34 (0) **          ACEMask:  &h6003F
29420 11:25:34 (0) **                    WBEM_ENABLE
29421 11:25:34 (0) **                    WBEM_METHOD_EXECUTE
29422 11:25:34 (0) **                    WBEM_FULL_WRITE_REP
29423 11:25:34 (0) **                    WBEM_PARTIAL_WRITE_REP
29424 11:25:34 (0) **                    WBEM_WRITE_PROVIDER
29425 11:25:34 (0) **                    WBEM_REMOTE_ACCESS
29426 11:25:34 (0) **                    WBEM_WRITE_DAC
29427 11:25:34 (0) **                    WBEM_READ_CONTROL
29428 11:25:34 (0) ** 
29429 11:25:34 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
29430 11:25:34 (0) **    Removing default security will cause some operations to fail!
29431 11:25:34 (0) **    It is possible to fix this issue by editing the security descriptor and adding the ACE.
29432 11:25:34 (0) **    For WMI namespaces, this can be done with 'WMIMGMT.MSC'.
29433 11:25:34 (0) ** 
29434 11:25:34 (0) ** WMI namespace security for 'ROOT/MICROSOFT': ........................................................................ MODIFIED.
29435 11:25:34 (1) !! ERROR: Default trustee 'NT AUTHORITY\AUTHENTICATED USERS' has been REMOVED!
29436 11:25:34 (0) **        - REMOVED ACE:
29437 11:25:34 (0) **          ACEType:  &h0
29438 11:25:34 (0) **                    ACCESS_ALLOWED_ACE_TYPE
29439 11:25:34 (0) **          ACEFlags: &h12
29440 11:25:34 (0) **                    CONTAINER_INHERIT_ACE
29441 11:25:34 (0) **                    INHERITED_ACE
29442 11:25:34 (0) **          ACEMask:  &h13
29443 11:25:34 (0) **                    WBEM_ENABLE
29444 11:25:34 (0) **                    WBEM_METHOD_EXECUTE
29445 11:25:34 (0) **                    WBEM_WRITE_PROVIDER
29446 11:25:34 (0) ** 
29447 11:25:34 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
29448 11:25:34 (0) **    Removing default security will cause some operations to fail!
29449 11:25:34 (0) **    It is possible to fix this issue by editing the security descriptor and adding the ACE.
29450 11:25:34 (0) **    For WMI namespaces, this can be done with 'WMIMGMT.MSC'.
29451 11:25:34 (0) ** 
29452 11:25:34 (0) ** WMI namespace security for 'ROOT/MICROSOFT/HOMENET': ................................................................ MODIFIED.
29453 11:25:34 (1) !! ERROR: Default trustee 'BUILTIN\ADMINISTRATORS' has been REMOVED!
29454 11:25:34 (0) **        - REMOVED ACE:
29455 11:25:34 (0) **          ACEType:  &h0
29456 11:25:34 (0) **                    ACCESS_ALLOWED_ACE_TYPE
29457 11:25:34 (0) **          ACEFlags: &h12
29458 11:25:34 (0) **                    CONTAINER_INHERIT_ACE
29459 11:25:34 (0) **                    INHERITED_ACE
29460 11:25:34 (0) **          ACEMask:  &h6003F
29461 11:25:34 (0) **                    WBEM_ENABLE
29462 11:25:34 (0) **                    WBEM_METHOD_EXECUTE
29463 11:25:34 (0) **                    WBEM_FULL_WRITE_REP
29464 11:25:34 (0) **                    WBEM_PARTIAL_WRITE_REP
29465 11:25:34 (0) **                    WBEM_WRITE_PROVIDER
29466 11:25:34 (0) **                    WBEM_REMOTE_ACCESS
29467 11:25:34 (0) **                    WBEM_WRITE_DAC
29468 11:25:34 (0) **                    WBEM_READ_CONTROL
29469 11:25:34 (0) ** 
29470 11:25:34 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
29471 11:25:34 (0) **    Removing default security will cause some operations to fail!
29472 11:25:34 (0) **    It is possible to fix this issue by editing the security descriptor and adding the ACE.
29473 11:25:34 (0) **    For WMI namespaces, this can be done with 'WMIMGMT.MSC'.
29474 11:25:34 (0) ** 
29475 11:25:34 (0) ** WMI namespace security for 'ROOT/MICROSOFT/HOMENET': ................................................................ MODIFIED.
29476 11:25:34 (1) !! ERROR: Default trustee 'NT AUTHORITY\AUTHENTICATED USERS' has been REMOVED!
29477 11:25:34 (0) **        - REMOVED ACE:
29478 11:25:34 (0) **          ACEType:  &h0
29479 11:25:34 (0) **                    ACCESS_ALLOWED_ACE_TYPE
29480 11:25:34 (0) **          ACEFlags: &h12
29481 11:25:34 (0) **                    CONTAINER_INHERIT_ACE
29482 11:25:34 (0) **                    INHERITED_ACE
29483 11:25:34 (0) **          ACEMask:  &h13
29484 11:25:34 (0) **                    WBEM_ENABLE
29485 11:25:34 (0) **                    WBEM_METHOD_EXECUTE
29486 11:25:34 (0) **                    WBEM_WRITE_PROVIDER
29487 11:25:34 (0) ** 
29488 11:25:34 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
29489 11:25:34 (0) **    Removing default security will cause some operations to fail!
29490 11:25:34 (0) **    It is possible to fix this issue by editing the security descriptor and adding the ACE.
29491 11:25:34 (0) **    For WMI namespaces, this can be done with 'WMIMGMT.MSC'.
29492 11:25:34 (0) ** 
29493 11:25:34 (0) ** WMI namespace security for 'ROOT/ASPNET': ........................................................................... MODIFIED.
29494 11:25:34 (1) !! ERROR: Default trustee 'BUILTIN\ADMINISTRATORS' has been REMOVED!
29495 11:25:34 (0) **        - REMOVED ACE:
29496 11:25:34 (0) **          ACEType:  &h0
29497 11:25:34 (0) **                    ACCESS_ALLOWED_ACE_TYPE
29498 11:25:34 (0) **          ACEFlags: &h12
29499 11:25:34 (0) **                    CONTAINER_INHERIT_ACE
29500 11:25:34 (0) **                    INHERITED_ACE
29501 11:25:34 (0) **          ACEMask:  &h6003F
29502 11:25:34 (0) **                    WBEM_ENABLE
29503 11:25:34 (0) **                    WBEM_METHOD_EXECUTE
29504 11:25:34 (0) **                    WBEM_FULL_WRITE_REP
29505 11:25:34 (0) **                    WBEM_PARTIAL_WRITE_REP
29506 11:25:34 (0) **                    WBEM_WRITE_PROVIDER
29507 11:25:34 (0) **                    WBEM_REMOTE_ACCESS
29508 11:25:34 (0) **                    WBEM_WRITE_DAC
29509 11:25:34 (0) **                    WBEM_READ_CONTROL
29510 11:25:34 (0) ** 
29511 11:25:34 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
29512 11:25:34 (0) **    Removing default security will cause some operations to fail!
29513 11:25:34 (0) **    It is possible to fix this issue by editing the security descriptor and adding the ACE.
29514 11:25:34 (0) **    For WMI namespaces, this can be done with 'WMIMGMT.MSC'.
29515 11:25:34 (0) ** 
29516 11:25:34 (0) ** WMI namespace security for 'ROOT/ASPNET': ........................................................................... MODIFIED.
29517 11:25:34 (1) !! ERROR: Default trustee 'NT AUTHORITY\AUTHENTICATED USERS' has been REMOVED!
29518 11:25:34 (0) **        - REMOVED ACE:
29519 11:25:34 (0) **          ACEType:  &h0
29520 11:25:34 (0) **                    ACCESS_ALLOWED_ACE_TYPE
29521 11:25:34 (0) **          ACEFlags: &h12
29522 11:25:34 (0) **                    CONTAINER_INHERIT_ACE
29523 11:25:34 (0) **                    INHERITED_ACE
29524 11:25:34 (0) **          ACEMask:  &h13
29525 11:25:34 (0) **                    WBEM_ENABLE
29526 11:25:34 (0) **                    WBEM_METHOD_EXECUTE
29527 11:25:34 (0) **                    WBEM_WRITE_PROVIDER
29528 11:25:34 (0) ** 
29529 11:25:34 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
29530 11:25:34 (0) **    Removing default security will cause some operations to fail!
29531 11:25:34 (0) **    It is possible to fix this issue by editing the security descriptor and adding the ACE.
29532 11:25:34 (0) **    For WMI namespaces, this can be done with 'WMIMGMT.MSC'.
29533 11:25:34 (0) ** 
29534 11:25:34 (0) ** 
29535 11:25:34 (0) ** DCOM security warning(s) detected: .................................................................................. 0.
29536 11:25:34 (0) ** DCOM security error(s) detected: .................................................................................... 13.
29537 11:25:34 (0) ** WMI security warning(s) detected: ................................................................................... 0.
29538 11:25:34 (0) ** WMI security error(s) detected: ..................................................................................... 42.
29539 11:25:34 (0) ** 
29540 11:25:34 (1) !! ERROR: Overall DCOM security status: ................................................................................ ERROR!
29541 11:25:34 (1) !! ERROR: Overall WMI security status: ................................................................................. ERROR!
29542 11:25:34 (0) ** - Started at 'Root' --------------------------------------------------------------------------------------------------------------
29543 11:25:34 (0) ** INFO: WMI permanent SUBSCRIPTION(S): ................................................................................ 1.
29544 11:25:34 (0) ** - ROOT/SUBSCRIPTION, NTEventLogEventConsumer.Name="SCM Event Log Consumer".
29545 11:25:34 (0) **   'select * from MSFT_SCMEventLogEvent'
29546 11:25:34 (0) ** 
29547 11:25:34 (0) ** WMI TIMER instruction(s): ........................................................................................... NONE.
29548 11:25:34 (0) ** INFO: WMI namespace(s) requiring PACKET PRIVACY: .................................................................... 4 NAMESPACE(S)!
29549 11:25:34 (0) ** - ROOT/CIMV2/SECURITY/MICROSOFTTPM.
29550 11:25:34 (0) ** - ROOT/CIMV2/SECURITY/MICROSOFTVOLUMEENCRYPTION.
29551 11:25:34 (0) ** - ROOT/CIMV2/TERMINALSERVICES.
29552 11:25:34 (0) ** - ROOT/SERVICEMODEL.
29553 11:25:34 (0) ** => When remotely connecting, the namespace(s) listed require(s) the WMI client to
29554 11:25:34 (0) **    use an encrypted connection by specifying the PACKET PRIVACY authentication level.
29555 11:25:34 (0) **    (RPC_C_AUTHN_LEVEL_PKT_PRIVACY or PktPrivacy flags)
29556 11:25:34 (0) **    i.e. 'WMIC.EXE /NODE:"SIMSIM-M" /AUTHLEVEL:Pktprivacy /NAMESPACE:\\ROOT\SERVICEMODEL Class __SystemSecurity'
29557 11:25:34 (0) ** 
29558 11:25:34 (1) !! ERROR: WMI MONIKER CONNECTION errors occured for the following namespaces: .......................................... 2 ERROR(S)!
29559 11:25:34 (0) ** - ROOT/CIMV2/APPLICATIONS, 0x80070002 -        "HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\CSDVersion"..
29560 11:25:34 (0) ** - ROOT/SECURITYCENTER, 0x8007054E -      -         ..
29561 11:25:34 (0) ** 
29562 11:25:34 (1) !! ERROR: WMI CONNECTION errors occured for the following namespaces: .................................................. 4 ERROR(S)!
29563 11:25:34 (0) ** - ROOT/CIMV2/APPLICATIONS, 0x8007054E -      -         ..
29564 11:25:34 (0) ** - ROOT/SECURITYCENTER, 0x8007054E -      -         ..
29565 11:25:34 (0) ** - Root/CIMV2/Applications, 0x8007054E -      -         ..
29566 11:25:34 (0) ** - Root/SecurityCenter, 0x8007054E -      -         ..
29567 11:25:34 (0) ** 
29568 11:25:34 (1) !! ERROR: WMI GET operation errors reported: ........................................................................... 10 ERROR(S)!
29569 11:25:34 (0) ** - Root/CIMV2, Win32_PerfFormattedData_Counters_HTTPServiceRequestQueues, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
29570 11:25:34 (0) **   MOF Registration: 'C:\WINDOWS\SYSTEM32\WBEM\WMIPERFINST.MOF'
29571 11:25:34 (0) ** - Root/CIMV2, Win32_PerfRawData_Counters_HTTPServiceRequestQueues, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
29572 11:25:34 (0) **   MOF Registration: 'C:\WINDOWS\SYSTEM32\WBEM\WMIPERFINST.MOF'
29573 11:25:34 (0) ** - Root/CIMV2, Win32_PerfFormattedData_Counters_HTTPServiceUrlGroups, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
29574 11:25:34 (0) **   MOF Registration: 'C:\WINDOWS\SYSTEM32\WBEM\WMIPERFINST.MOF'
29575 11:25:34 (0) ** - Root/CIMV2, Win32_PerfRawData_Counters_HTTPServiceUrlGroups, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
29576 11:25:34 (0) **   MOF Registration: 'C:\WINDOWS\SYSTEM32\WBEM\WMIPERFINST.MOF'
29577 11:25:34 (0) ** - Root/CIMV2, Win32_PerfFormattedData_ESENT_Database, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
29578 11:25:34 (0) **   MOF Registration: 'C:\WINDOWS\SYSTEM32\WBEM\WMIPERFINST.MOF'
29579 11:25:34 (0) ** - Root/CIMV2, Win32_PerfRawData_ESENT_Database, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
29580 11:25:34 (0) **   MOF Registration: 'C:\WINDOWS\SYSTEM32\WBEM\WMIPERFINST.MOF'
29581 11:25:34 (0) ** - Root/CIMV2, Win32_PerfFormattedData_ESENT_DatabaseInstances, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
29582 11:25:34 (0) **   MOF Registration: 'C:\WINDOWS\SYSTEM32\WBEM\WMIPERFINST.MOF'
29583 11:25:34 (0) ** - Root/CIMV2, Win32_PerfRawData_ESENT_DatabaseInstances, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
29584 11:25:34 (0) **   MOF Registration: 'C:\WINDOWS\SYSTEM32\WBEM\WMIPERFINST.MOF'
29585 11:25:34 (0) ** - Root/CIMV2, Win32_PerfFormattedData_ESENT_DatabaseTableClasses, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
29586 11:25:34 (0) **   MOF Registration: 'C:\WINDOWS\SYSTEM32\WBEM\WMIPERFINST.MOF'
29587 11:25:34 (0) ** - Root/CIMV2, Win32_PerfRawData_ESENT_DatabaseTableClasses, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
29588 11:25:34 (0) **   MOF Registration: 'C:\WINDOWS\SYSTEM32\WBEM\WMIPERFINST.MOF'
29589 11:25:34 (0) ** => When a WMI performance class is missing (i.e. 'Win32_PerfRawData_ESENT_DatabaseTableClasses'), it is generally due to
29590 11:25:34 (0) **    a lack of buffer refresh of the WMI class provider exposing the WMI performance counters.
29591 11:25:34 (0) **    You can refresh the WMI class provider buffer with the following command:
29592 11:25:34 (0) ** 
29593 11:25:34 (0) **    i.e. 'WINMGMT.EXE /SYNCPERF'
29594 11:25:34 (0) ** 
29595 11:25:34 (0) ** WMI MOF representations: ............................................................................................ OK.
29596 11:25:34 (0) ** WMI QUALIFIER access operations: .................................................................................... OK.
29597 11:25:34 (0) ** WMI ENUMERATION operations: ......................................................................................... OK.
29598 11:25:34 (0) ** WMI EXECQUERY operations: ........................................................................................... OK.
29599 11:25:34 (1) !! ERROR: WMI GET VALUE operation errors reported: ..................................................................... 1 ERROR(S)!
29600 11:25:34 (0) ** - Root/CIMV2, Instance: Win32_Service='WSCSVC', Property: Displayname='  ' (Expected default='Security Center').
29601 11:25:34 (0) ** 
29602 11:25:34 (0) ** WMI WRITE operations: ............................................................................................... NOT TESTED.
29603 11:25:34 (0) ** WMI PUT operations: ................................................................................................. NOT TESTED.
29604 11:25:34 (0) ** WMI DELETE operations: .............................................................................................. NOT TESTED.
29605 11:25:34 (0) ** WMI static instances retrieved: ..................................................................................... 1590.
29606 11:25:34 (0) ** WMI dynamic instances retrieved: .................................................................................... 0.
29607 11:25:34 (0) ** WMI instance request cancellations (to limit performance impact): ................................................... 1.
29608 11:25:34 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
29609 11:25:34 (0) ** # of Event Log events BEFORE WMIDiag execution since the last 20 day(s):
29610 11:25:34 (0) **   DCOM: ............................................................................................................. 0.
29611 11:25:34 (0) **   WINMGMT: .......................................................................................................... 0.
29612 11:25:34 (0) **   WMIADAPTER: ....................................................................................................... 0.
29613 11:25:34 (0) ** 
29614 11:25:34 (0) ** # of additional Event Log events AFTER WMIDiag execution:
29615 11:25:34 (0) **   DCOM: ............................................................................................................. 0.
29616 11:25:34 (0) **   WINMGMT: .......................................................................................................... 0.
29617 11:25:34 (0) **   WMIADAPTER: ....................................................................................................... 0.
29618 11:25:34 (0) ** 
29619 11:25:34 (0) ** 1 error(s) 0x80070002 - (WBEM_UNKNOWN) This error code is external to WMI.
29620 11:25:34 (0) ** => Errors starting with 0x8007 are Win32 errors, NOT WMI errors. More information can be found
29621 11:25:34 (0) **    with the 'NET.EXE HELPMSG <dddd>' command, where <dddd> is the last four hex digits (0x0002) 
29622 11:25:34 (0) **    converted in decimal (2).
29623 11:25:34 (0) **    - NET HELPMSG 2
29624 11:25:34 (0) ** 
29625 11:25:34 (0) ** 
29626 11:25:34 (0) ** 5 error(s) 0x8007054E - (WBEM_UNKNOWN) This error code is external to WMI.
29627 11:25:34 (0) ** => Errors starting with 0x8007 are Win32 errors, NOT WMI errors. More information can be found
29628 11:25:34 (0) **    with the 'NET.EXE HELPMSG <dddd>' command, where <dddd> is the last four hex digits (0x054E) 
29629 11:25:34 (0) **    converted in decimal (1358).
29630 11:25:34 (0) **    - NET HELPMSG 1358
29631 11:25:34 (0) ** 
29632 11:25:34 (0) ** 
29633 11:25:34 (0) ** 10 error(s) 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found
29634 11:25:34 (0) ** => This error is typically a WMI error. This WMI error is due to:
29635 11:25:34 (0) **    - a missing WMI class definition or object.
29636 11:25:34 (0) **      (See any GET, ENUMERATION, EXECQUERY and GET VALUE operation failures).
29637 11:25:34 (0) **      You can correct the missing class definitions by:
29638 11:25:34 (0) **      - Manually recompiling the MOF file(s) with the 'MOFCOMP <FileName.MOF>' command.
29639 11:25:34 (0) **      Note: You can build a list of classes in relation with their WMI provider and MOF file with WMIDiag.
29640 11:25:34 (0) **            (This list can be built on a similar and working WMI Windows installation)
29641 11:25:34 (0) **            The following command line must be used:
29642 11:25:34 (0) **            i.e. 'WMIDiag CorrelateClassAndProvider'
29643 11:25:34 (0) **      Note: When a WMI performance class is missing, you can manually resynchronize performance counters
29644 11:25:34 (0) **            with WMI by starting the ADAP process.
29645 11:25:34 (0) **    - a WMI repository corruption.
29646 11:25:34 (0) **      In such a case, you must rerun WMIDiag with 'WriteInRepository' parameter
29647 11:25:34 (0) **      to validate the WMI repository operations.
29648 11:25:34 (0) **    Note: ENSURE you are an administrator with FULL access to WMI EVERY namespaces of the computer before
29649 11:25:34 (0) **          executing the WriteInRepository command. To write temporary data from the Root namespace, use:
29650 11:25:34 (0) **          i.e. 'WMIDiag WriteInRepository=Root'
29651 11:25:34 (0) **    - If the WriteInRepository command fails, while being an Administrator with ALL accesses to ALL namespaces
29652 11:25:34 (0) **      the WMI repository must be reconstructed.
29653 11:25:34 (0) **    Note: The WMI repository reconstruction requires to locate all MOF files needed to rebuild the repository,
29654 11:25:34 (0) **          otherwise some applications may fail after the reconstruction.
29655 11:25:34 (0) **          This can be achieved with the following command:
29656 11:25:34 (0) **          i.e. 'WMIDiag ShowMOFErrors'
29657 11:25:34 (0) **    Note: The repository reconstruction must be a LAST RESORT solution and ONLY after executing
29658 11:25:34 (0) **          ALL fixes previously mentioned.
29659 11:25:34 (2) !! WARNING: Static information stored by external applications in the repository will be LOST! (i.e. SMS Inventory)
29660 11:25:34 (0) ** 
29661 11:25:34 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
29662 11:25:34 (0) ** WMI Registry key setup: ............................................................................................. OK.
29663 11:25:34 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
29664 11:25:34 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
29665 11:25:34 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
29666 11:25:34 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
29667 11:25:34 (0) ** 
29668 11:25:34 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
29669 11:25:34 (0) ** ------------------------------------------------------ WMI REPORT: END -----------------------------------------------------------
29670 11:25:34 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
29671 11:25:34 (0) ** 
29672 11:25:34 (0) ** ERROR: WMIDiag detected issues that could prevent WMI to work properly!.  Check 'C:\USERS\SIMSIM\APPDATA\LOCAL\TEMP\WMIDIAG-V2.0_VISTA.CLI.RTM.32_SIMSIM-M_2007.06.10_11.10.40.LOG' for details.
29673 11:25:34 (0) ** 
29674 11:25:34 (0) ** WMIDiag v2.0 ended on 10  2007 . at 11:25 (W:170 E:77 S:1).
